Dyna Glide ModelsSuper Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
can anyone give me a general idea of how much $$ i'm looking at to put 16" apes on my fatbob? Everything from the bars to the cables, wiring etc. Any help is appreciated!
depending on bars and type of cables I did my super glide my self for less than $200. plain black cables and a wirring kit from JP cycles. bars run around $50 from hd, about $140 for the all 3 cables, $30 for the wirring kit, "cheapest one". put 16 on my wifes Roadking cables where custom made and it was still about $200. take your time and do it yourself otherwise it is an 8 hour job at HD
Last edited by Choppernibs; 05-11-2009 at 10:07 PM.
If you do it yourself your looking at the cost of bars, plus clutch, break, and throttle cables. If doing at the dealer add your local HDshop labour cost X 6 to 8 hours plus tax.
I did 14" el cheapo bars from Dennis Kirk with Magnum Sterling Chromite cables. Extended the wires myself. Under $300. Plain black vinyl cables would have been about $100 less.