Tachometer Options
#1
#2
#3
RE: Tachometer Options
I just installed one on my FXDWG and the whole kit, which you need to buy each piece separately for ran about $250.00. That was for the tach itself, wiring harness, cup, and mounitng bracket. A little pricey but it worked the first time I fired it up with no problems. That price does not include labor which in my area is about $80.00 an hour. I did the install myself and it took me about 3-4 hours, but that may depend on what you need to take apart on your bike to hook up the 3 wires. I already had the tank off to relocate the front maker lights which made the job neater and easier. As they say your mileage may vary depending upon your level of wrenching abilites.
Hog 2319
06 Dyna WG
Hog 2319
06 Dyna WG
#5
#7
Trending Topics
#8
RE: Tachometer Options
You keep the speedo and add the panel, harness, tach and mounting hardware. I had to extend 12 wires on the
original harness about 8 " too.
The LR and the BOB are almost identical bikes.
WillieC
original harness about 8 " too.
The LR and the BOB are almost identical bikes.
WillieC
ORIGINAL: Surly
Do you keep your bob speedo and add the tacho and trim panel from the low rider WillieC or is it all new ?
cheers
Surly
Do you keep your bob speedo and add the tacho and trim panel from the low rider WillieC or is it all new ?
cheers
Surly
#9
#10