Fat Bob handlebars fit Street Bob?
#1
#3
You're lucky you have an 07', the 08's and up require you to swap tripple trees to fit drag bars. The fatbob bars will fit, but you will need the risers as well. It may be cheaper to go with a drag bar from Debrix Cycles. I paid $11 for mine and risers are like $20 or $30 on ebay, plus you can get any rise/pullback you want.
#6
You're lucky you have an 07', the 08's and up require you to swap tripple trees to fit drag bars. The fatbob bars will fit, but you will need the risers as well. It may be cheaper to go with a drag bar from Debrix Cycles. I paid $11 for mine and risers are like $20 or $30 on ebay, plus you can get any rise/pullback you want.
#7
Bob to Bob Bars
I have a Fat Bob and took the stock bars off and had installed 1 1/4" Fat Boy bars on the stock risers. I needed to sit up a little more. The stock Fat Bob bars and risers are 1 1/4" so you need to change everything. The ends of the bars reduce to 1" so your exhisting Master Cylinder should fit. I had a dealer do it with Black Diamond Cut Cables and it was PRICEY.
Creaky1
Creaky1
Last edited by creaky1; 01-03-2009 at 01:09 PM.
Trending Topics
#8
Your lucky you have the 07. I put new bars on my 08 and had to change out the triple tree. I put the HD street slammer bars on mine. Definatly worth all of the hassle, i'm very happy with the bars.
IMO, if your gonna change the bars, make sure you get some with internal wiring. looks much better
IMO, if your gonna change the bars, make sure you get some with internal wiring. looks much better
#9
#10