Who has the sickest Bob?
#285
#287
I actually bought this bike the way it is right now, but I have some plans to make it mine this summer. Gave up motocross for a harley.
Anyways..
-its got progressives in the back
-I believe a heritage springer in the front (modifications to the neck were needed to fit it)
-the apes are very thick and have been milled down for the clamp area. (haven't measured them)
- Power commander under the seat
- The spokes are aftermarket. They have a twisted type design.
- The pipes are stock, wrapped, with removable baffle mufflers
- I also believe the rear fender was made
I'd like to change out the bars as they are too high for long rides. Give it more of a chopped look but still keep it nice. I'm getting alot of ideas off the forums
Anyways..
-its got progressives in the back
-I believe a heritage springer in the front (modifications to the neck were needed to fit it)
-the apes are very thick and have been milled down for the clamp area. (haven't measured them)
- Power commander under the seat
- The spokes are aftermarket. They have a twisted type design.
- The pipes are stock, wrapped, with removable baffle mufflers
- I also believe the rear fender was made
I'd like to change out the bars as they are too high for long rides. Give it more of a chopped look but still keep it nice. I'm getting alot of ideas off the forums
#288
Try just rotating them back so they are in line with the forks. That will lower where the grips are and look better overall.
#290
Heres a pic of how they stack up with me on it. I'd like them to be more shoulder height.
Last edited by 207; 03-18-2010 at 11:11 PM.