What would I need Besides the wheel/tire?

 

Pretty much all there is to it. Front fender will work fine.

 

hold on just a second there, professor

you can't just pop a 21 inch front wheel on a stock street bob front end... problem is with the hub and spacers.... you'll have to lace up a 21 inch to the street bob hub

unless, of course, you're going to put a wide glide front end on

 

lace it up to ur hub end result right here

 

Ventura..I'm switching from a billet wheel to a billet wheel can I swap the hubs?

 

1. Buy a laced wheel that fits the midglide front.
2. Buy billet wheel that fits the midglide front.
3. Switch entire front end to W/G, many wheels available for this setup.
4. Check out jsbridgew entire thread on fitting a 21" rim to bob hub.

How deep are your pockets?

I went the W/G route and bought a 21X3.25 and stock W/G spacers. Everything fit up perfectly.

 

Ventura, What tire did you use?

 

reded mine is also a 3.25 with a 120 70 21 avon venom its a venom ML

 

Ventura, Thanks. I have the 3.25 x 21" rim; have not decided on type spokes yet though

 

My question is, I want to put Performance Machine wheels on my bob. Can I just order the wheels from them and they bolt right on?