Internally wiring z bars, Need Help, tips or advice welcome.
 \\;\\\\\\;
 \\;
 \\;
 \\;
 \\;
#36
08-01-2008, 03:45 PM
Banned
Join Date: Aug 2008
Location:
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
RE: Internally wiring z bars, Need Help, tips or advice welcome.
Looks good but might I suggest that you push the bars forward a bit. The switch kit does come with end pins. http://www.customchrome.com/catalogs...l.asp?page=162
#38
08-01-2008, 05:47 PM
#39
08-01-2008, 06:08 PM
RE: Internally wiring z bars, Need Help, tips or advice welcome.
How I did it as short as possible.
- Strip off loose wiring sleeve.
- Replace with one piece shrink wrap (Fryes). Heated tight but bendable.
- Over that one layer of Security packing tape put on lengthwise so fibers go with the wire, cut off excess.
- Strip off loose wiring sleeve.
- Replace with one piece shrink wrap (Fryes). Heated tight but bendable.
- Over that one layer of Security packing tape put on lengthwise so fibers go with the wire, cut off excess.
#40
08-01-2008, 06:10 PM