Dyna Glide Models Super Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Sponsored by:
Sponsored by:

a silly request...

Thread Tools
 
Search this Thread
 
  #1  
Old 07-07-2008 | 07:18 PM
jsbridgew's Avatar
jsbridgew
Thread Starter
|
Road Warrior
Joined: Nov 2007
Posts: 1,646
Likes: 4
From: south of Boston
Default a silly request...

'07 wide glide

...but is there any chance anyone can measure the distance between the rubber down the center on the front tire and the fender...in the front and in the rear....should be same, but not sure

here's the thing.... i took my stock one off and mocked up a Russ Wernimont one, but didn't measure the distance the fender ought to idealy be off the tire

would be much appreciated if someone could do this for me.... i have the fender centered everywhere else otherwise and it took me forever... i don't want to disturb it, say for pressing down on it a bit to get a proper distance

thanks, in advance, to anyone who'll honor this silly request!

paul
 
  #2  
Old 07-07-2008 | 09:21 PM
8541hog's Avatar
8541hog
Ultimate HDF Member
Joined: May 2008
Posts: 6,642
Likes: 47
From: Ogden, UT
Default RE: a silly request...

I would imagine there is not much difference with the 05 and 07, I have 1/2" clearance on mine to the tire, but then mine is not stock tire or fender. Set it where it looks best to you.
 
  #3  
Old 07-07-2008 | 09:21 PM
Newhawk's Avatar
Newhawk
Cruiser
Joined: May 2007
Posts: 198
Likes: 0
From: Colorado Sprgs, CO
Default RE: a silly request...

'07 wide glide

Just replaced my front tire 3500 miles ago. Crown of tire and bottom of fender (clearance) at the front of the fender is 1 3/16 inch, at the rear of the front fender it was 1 1/16 inch.
Is that what you were looking for?
 
  #4  
Old 07-07-2008 | 09:25 PM
sargek's Avatar
sargek
Road Warrior
Joined: Oct 2006
Posts: 1,916
Likes: 0
From: San Antonio, Texas
Default RE: a silly request...

Well, my '04 WG measures 1 9/16 in the front and 1 3/8 in the back. That's the front and back of the FRONT fender, right?
 
  #5  
Old 07-07-2008 | 09:27 PM
sargek's Avatar
sargek
Road Warrior
Joined: Oct 2006
Posts: 1,916
Likes: 0
From: San Antonio, Texas
Default RE: a silly request...

Damn, from everyone else's measurements, looks like they are running the front tire much closer on newer models.
 
  #6  
Old 07-07-2008 | 09:42 PM
Jet x 4's Avatar
Jet x 4
Tourer
Joined: Sep 2006
Posts: 481
Likes: 0
From: Puyallup WA
Default RE: a silly request...

My 06 WG measures 3/4 in front of fender and 1 1/4 in rear of front fender.&nbsp\\; Hope this helps.
 
  #7  
Old 07-07-2008 | 10:03 PM
jsbridgew's Avatar
jsbridgew
Thread Starter
|
Road Warrior
Joined: Nov 2007
Posts: 1,646
Likes: 4
From: south of Boston
Default RE: a silly request...

helps big time, boys!....thanks a bunch.....i have it at 1 inch front and rear.... will post pics when done!

paul
 
  #8  
Old 07-08-2008 | 01:21 AM
SC-Longhair's Avatar
SC-Longhair
Club Member
Joined: Feb 2008
Posts: 11,474
Likes: 23
From: Passaic County, NJ
Default RE: a silly request...

Jet, did you rake your front end? Looks more angled to me for some reason. Could be it's just an illusion.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nosparkoflife
Dyna Glide Models
2
11-25-2013 04:36 PM
lateralus
Sportster Models
0
12-08-2012 01:55 AM
rabzdok
General Topics/Tech Tips
0
09-21-2009 10:16 AM
octane
Dyna Glide Models
14
02-21-2009 06:15 PM
stang9986
Dyna Glide Models
2
02-03-2009 06:40 PM



Quick Reply: a silly request...



All times are GMT -5. The time now is 05:03 PM.