synthetic or dino, what weights for trans and primary
#11
05-27-2008, 12:47 AM
#12
05-27-2008, 02:49 AM
#13
05-27-2008, 08:48 AM
Road Captain
RE: synthetic or dino, what weights for trans and primary
ORIGINAL: freebyrd
dymamite 17 do you know all the position of the drain wholes? and the torque specs? the primary cover was the bitch for me,
they didn't sell me the frisbee gasket from the dealership which is what i needed so i reused the frisbee bike only has 2800 miles on it,
and the primary must be filled with the bike standing up level,
i had to do a trick with a 2x4 and a bottle jack, don't ask?
but it was level
does your fat bob have the 96inch and the six speed?
dymamite 17 do you know all the position of the drain wholes? and the torque specs? the primary cover was the bitch for me,
they didn't sell me the frisbee gasket from the dealership which is what i needed so i reused the frisbee bike only has 2800 miles on it,
and the primary must be filled with the bike standing up level,
i had to do a trick with a 2x4 and a bottle jack, don't ask?
but it was leveldoes your fat bob have the 96inch and the six speed?
I do not remember the torque specs, again I got them from the Service Manual. I do use a calibrated torque wrench.
My bike is an 07 Low Rider.
#14
05-27-2008, 09:17 AM
RE: synthetic or dino, what weights for trans and primary
ORIGINAL: arnold
I have been running HD Shockproof in the tran, just changed out after 5000 and what a waste
I have been running HD Shockproof in the tran, just changed out after 5000 and what a waste
#15
05-31-2008, 11:09 AM
Road Warrior
Join Date: Oct 2006
Location: San Antonio, Texas
Posts: 1,916
Likes: 0
Received 0 Likes
on
0 Posts
RE: synthetic or dino, what weights for trans and primary
ORIGINAL: freebyrd
yes it is for deisel applications some of the toughest 10/40 on the market and won't break the bank 2.88 a quart at wally world
freebyrd
diesel engine oil?
freebyrd
#16
05-31-2008, 06:17 PM
RE: synthetic or dino, what weights for trans and primary
ORIGINAL: ta_gregg
I’m doing the 1000 mile service on my 2008 Fat Bob; it’s my first bike so my knowledge is low.
What is better synthetic or non and does synthetic effect the warranty?
What is a good brand and weight for the trans and primary? Are they the same fluid.
I’m doing the 1000 mile service on my 2008 Fat Bob; it’s my first bike so my knowledge is low.
What is better synthetic or non and does synthetic effect the warranty?
What is a good brand and weight for the trans and primary? Are they the same fluid.
#17
05-31-2008, 06:33 PM
Outstanding HDF Member
#19
07-21-2009, 10:16 PM
Grand HDF Member
Thread
Thread Starter
Forum
Replies
Last Post
iaff84
Tri Glide, RG3 & Freewheeler Models
8
09-18-2010 07:30 AM
