Screaming Eagle tire 170/60
#11
05-14-2008 | 01:04 PM
Thread Starter
|
muderator
Joined: May 2006
Posts: 14,469
Likes: 9,141
From: the 50s & the 60s
RE: Screaming Eagle tire 170/60
ORIGINAL: chandler
NO ONE makes a radial in a 100/90-19 profile. The construction of a radial requiresan aspect ratio along the lines of a 120/70 or similar proportions.
Most vendors say you can mix a rear radial and a front bias, but I haven't done so.
NO ONE makes a radial in a 100/90-19 profile. The construction of a radial requiresan aspect ratio along the lines of a 120/70 or similar proportions.
Most vendors say you can mix a rear radial and a front bias, but I haven't done so.
I'm curious where you picked up on the construction proportionrequirements.
ORIGINAL: DougsDyna
Mud- the only Dunlop front radials I am seeing on their site fo a 19" wheel is the D208 ZR 120/70ZR/19, but it needs a 3" rim.
All the other model Harleys I see with a rear radial are using a biased ply on the front.
DougJ
Mud- the only Dunlop front radials I am seeing on their site fo a 19" wheel is the D208 ZR 120/70ZR/19, but it needs a 3" rim.
All the other model Harleys I see with a rear radial are using a biased ply on the front.
DougJ
Do you have a link to the page that gives the rim size info??
ORIGINAL: dyna rider
Mud-If you check the J&P website, on radial tires, it says you cannot put a radial tire on the front of a "big twin". I don't know why. Everybody else that sells them says it's O.K. I will be watching what you come up with.
Mud-If you check the J&P website, on radial tires, it says you cannot put a radial tire on the front of a "big twin". I don't know why. Everybody else that sells them says it's O.K. I will be watching what you come up with.
ORIGINAL: joe.1955
The HD accessories catalog lists a 19 " Screamin' Eagle front tire #40554-04.
GT502F 100/90-19
Doesn't state whether it is a radial or not.
The HD accessories catalog lists a 19 " Screamin' Eagle front tire #40554-04.
GT502F 100/90-19
Doesn't state whether it is a radial or not.
Thanks for the #.
ORIGINAL: Hughey79
That is a sweet tire for sure. For those of us that have lowered the bike
has anyone had any issues with rubbing on any of the turn signal
hardware tucked up in the rear fender?
I will be watching this mud cause tires are my next mod.
That is a sweet tire for sure. For those of us that have lowered the bike
has anyone had any issues with rubbing on any of the turn signal
hardware tucked up in the rear fender?
I will be watching this mud cause tires are my next mod.
And doublecheck after a few miles.
HD also offers a very nice kit to prevent problems.
mud..............
#13
05-15-2008 | 07:15 PM
Thread Starter
|
muderator
Joined: May 2006
Posts: 14,469
Likes: 9,141
From: the 50s & the 60s
#16
05-16-2008 | 08:14 AM
Elite HDF Member
Joined: Aug 2007
Posts: 4,722
Likes: 7
RE: Screaming Eagle tire 170/60
ORIGINAL: DynaDan
Mud, Give us a good review. I'm probably going with the same ones in a few weeks. I'm curious if that centerline tread is gonna track the grooves in the roads.
Mud, Give us a good review. I'm probably going with the same ones in a few weeks. I'm curious if that centerline tread is gonna track the grooves in the roads.
Thread
Thread Starter
Forum
Replies
Last Post
snooper0069
Dyna Glide Models
17
03-28-2010 05:09 PM
