FXDP Floorboard Kit on 06 Later Dyna
#51
01-01-2009 | 12:47 PM
Pockets2000 sent me the pdf file of J01921 and I've uploaded it to one of my web sites. You can download it by clicking here.
#52
01-01-2009 | 06:02 PM
Road Warrior
Joined: Dec 2008
Posts: 1,530
Likes: 1
From: Upstate, SC
Thanks to Rene and Pockets2000 I've been able to compile a list of just the parts you would need to put these footboards on your bike without the forward shifter assembly and related hardware. This is what you'd need for only the flootboards and the brake pedal assembly, and using the existing mid-mount shifter.
Items from J01921:
Items from J01921:
3 Socket head cap screw, self tapping (8) 3214
18 Assembly, right front footboard 50521-01
19 Right rear footboard support 50526-01
20 Left front footboard support 50529-01
21 Left rear footboard support 50530-01
22 Assembly, footboard (2) 50632-85
23 Shoulder bolt, 1/4-20 x 1 (4) 50635-82A
29 Lockwasher, 3/8" (8) 7045
31 Flange nut, 1/4-20 (4) 7716
Updated items from 2003 FXDP manual (needed because of updated brake pedal design):18 Assembly, right front footboard 50521-01
19 Right rear footboard support 50526-01
20 Left front footboard support 50529-01
21 Left rear footboard support 50530-01
22 Assembly, footboard (2) 50632-85
23 Shoulder bolt, 1/4-20 x 1 (4) 50635-82A
29 Lockwasher, 3/8" (8) 7045
31 Flange nut, 1/4-20 (4) 7716
1 Cotter pin 515
3 Screw, 3/8-16 X 1 Torx 4059
4 Washer, 1/4" 6099
6 Washer, 7/16" 6516HW
7 Washer, 3/8 X 13/16 X 1/16 (2) 6701
9 Hex jam nut, 5/16-24 7744
10 LOCKNUT 7/16-14 X 21/64 X 5/8 hex 7827W
14 SHAFT, pivot 33689-02
15 BUSHING, flanged (2) 33703-01
16 Assembly, Brake pedal 33711-02
17 WASHER, spring wave 34641-01
26 Linkage, rear brake push rod 41954-01
29 Pad, brake pedal 42416-83
31 Clevis pin 42460-80B
38 Fitting, grease 50972-75
Not listed in either:3 Screw, 3/8-16 X 1 Torx 4059
4 Washer, 1/4" 6099
6 Washer, 7/16" 6516HW
7 Washer, 3/8 X 13/16 X 1/16 (2) 6701
9 Hex jam nut, 5/16-24 7744
10 LOCKNUT 7/16-14 X 21/64 X 5/8 hex 7827W
14 SHAFT, pivot 33689-02
15 BUSHING, flanged (2) 33703-01
16 Assembly, Brake pedal 33711-02
17 WASHER, spring wave 34641-01
26 Linkage, rear brake push rod 41954-01
29 Pad, brake pedal 42416-83
31 Clevis pin 42460-80B
38 Fitting, grease 50972-75
Pad, footboard (2) 50614-91A
#53
01-01-2009 | 07:02 PM
Cruiser
Joined: Jul 2007
Posts: 131
Likes: 0
From: Liberty Township, Ohio
For what it is worth - I don't think you need the footboard pads. The 50632-85 footboard assembly I ordered came with the rubber pad. Check with your local parts guy.
I am planning to make a shifter bracket this winter. Plan to make it as factory looking as possible. It will bolt to the front footboard bracket and have a support rib on the back side. It will be powder coated black to match the other parts. I will post pictures and specs when I am done. Have a model of the part made - just need to do a mock up to be sure it works well then build the real deal.
I am planning to make a shifter bracket this winter. Plan to make it as factory looking as possible. It will bolt to the front footboard bracket and have a support rib on the back side. It will be powder coated black to match the other parts. I will post pictures and specs when I am done. Have a model of the part made - just need to do a mock up to be sure it works well then build the real deal.
#54
01-01-2009 | 07:14 PM
Road Warrior
Joined: Dec 2008
Posts: 1,530
Likes: 1
From: Upstate, SC
Total for all the parts on my list shipped from Zanotti is about $465.
#57
01-02-2009 | 11:29 PM
Road Warrior
Joined: Dec 2008
Posts: 1,530
Likes: 1
From: Upstate, SC
I just ordered all the individual parts from Zanotti to put these on without the forward shifter. I'll be using the existing mid mount shifter, or an extended shifter mounted to the mid mount shaft.
Here's the list of parts needed and the prices. Total isn't too bad when you consider what the HD chrome forward controls list for.
Here's the list of parts needed and the prices. Total isn't too bad when you consider what the HD chrome forward controls list for.
#59
01-03-2009 | 11:49 AM
Road Warrior
Joined: Dec 2008
Posts: 1,530
Likes: 1
From: Upstate, SC
You went for the "old style" stock footboard pads???
50614-91A FOOTBOARD PAD
If ordering new, you might consider the newer style 06+ pads. Also the brake pad changed in 06+
Just saying, for those of you with 06+ Dyna Bikes it might be more correct..
Most of you will probably go for the Billet, Skull, Flame, Diamond Plate, etc. for your inserts, pads, and shifter pegs.
50614-91A FOOTBOARD PAD
If ordering new, you might consider the newer style 06+ pads. Also the brake pad changed in 06+
Just saying, for those of you with 06+ Dyna Bikes it might be more correct..
Most of you will probably go for the Billet, Skull, Flame, Diamond Plate, etc. for your inserts, pads, and shifter pegs.
#60
01-06-2009 | 01:40 PM
floor board set on Ebay!
For your information: Today a complete set is offered at Ebay today (01-06-2009)(http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us)
René
René