You will not find any of the parts needed on the Harley web site. You will have to get a parts guy to look them up for you. You will need to get 1 softail footboard, the shifter kit from eglidegoodies, and the items to make the linkage.

 

I have the Parts and repair books for my 03 FXDP and Tonight I'll look up the bunbers. Great after a year I get to open up the book.

 

You can find the prices in the Lake Shore H-D database (www.LSHD1.com) and the Zanotti database (www.zanottimotor.com/shopping/pLookUp.php)

 

PART PRICES ADDED - looked up on Zanotti's web site

FROM THE J01921 parts list

Item Description Part No.
3 Socket head cap screw, self tapping (8) 3214 - 1.50@

20 Left front footboard support 50529-01 - 50.76

21 Left rear footboard support 50530-01 - 50.76

22 Assembly, footboard (1) 50621-79A - 41.87

23 Shoulder bolt, 1/4-20 x 1 (4) 50635-82A - 1.65@

29 Lockwasher, 3/8" (8) 7045 - .29@

31 Flange nut, 1/4-20 (4) 7716 - 1.10@

7 Assembly,adjustable shifter rod 33719-79B - 16.07

18 Assembly, right front footboard
and brake pedal bracket 50521-01 - 50.76

19 Right rear footboard support 50526-01 - 50.76

22 Assembly, footboard (1) 50632-85 - 46.86

FROM THE DYNA DEFENDER PARTS LIST (POSTED EARLIER IN THIS THREAD)

1 Pin, Cotter 515 - .40

3 Screw, 3/8-16 X 1 Torx 4059 - 1.93

4 Washer 6099 - 1.10

6 Washer 6516HW - 1.00

7 Washer, 3/8 X 13/16 X 1/16 6701 - .08

9 Nut 7744 - .55

10 Nut 7827W - 1.12

14 SHAFT, pivot 33689-02 - 28.93

16 Pedal, Brake 33711-02 - 42.67

17 WASHER, spring wave 34641-01 - 3.52

26 Push Rod 41954-01 - 19.02

29 Pad, Pedal 42416-83 - 3.74

31 Pin, Clevis 42460-80B - 2.00

Total of Harley parts (looked up and priced per Zanottis web site) - 439.21

Shifter kit from EGLIDEGOODIES.COM - 199.99

TOTAL OF ALL PARTS NEEDED - 639.20

 

To Pockets2000, did you have any dimensions for that bracket? I'm thinking of having something like that machined, or at least get some prices on getting one or some made. Thanks Michael Whalen

 

What do you guys think about cutting the OEM shifter in half and extending it to 12 or 13 inches then sending it in to get rechromed (not sure what chroming costs).....would the far length require to high of a shift that is uncomfortable or too long of a downshift that the floorboard will be in the way....I just put my boards on...will post pics soon!
Still snow here so can't ride, but the 9 inch shifter feels too tight on the boards...
then again...if pockets comes up with the plan...then

 

Dont wait for me to come up with a plan. I put on the shifter kit from EGLIDEGOODIES and am very happy with the results. Pictures are posted here. I especially like the fact that you get full use of the footboard - no shifters taking room away from you. The installation I did is very clean ande factory looking - which is what I was after. I really dont plan anything further on this.

 

Michael - the kit from eglidegoodies.com is 199.99. This includes 3 billet aluminum machined shifter arms polished to a show level quality- the brackets and the ends you would need to put this together. You cannot have this machined elsewhere for any less - unless you can do the machine work yourself or have a very good freind to do it for you. It would take a lot of time to dimension out the parts involved to try to remake them. If i get some time i will give some dimensions for this. However as can be seen by the part posting price is about the same as buying all the parts from the original kit - soooooooooooooooo what cha waitin for. This is a very easy to do and clean installation for this.

 

I meant the original bracket you were designing, If the e-glide kit would bolt on to the FXDP brackets, I would have it ordered when you got yours!!

 

Not planning to do anything further with this at this time. Like I said I am very happy with the outcome of the way I went. The eglide shifter is very easy to installl. The plate is 1/8 in aluminum stock. Very easy for even a novice to make. And the biggest bonus is the entire footboard is open for your foot. That is what this shifter was designed for. If you would like to run with this bracket idea feel free. The dimensions needed to make it are posted earlier in this thread.

PS the only change you have to make is a 50.00 footboard and a 5.00 plate to install this kit. Very easy install and very clean.