2" or 3" tank lift
#13
#14
RE: 2" or 3" tank lift
made my own 1 5/8" out of stainless steel of course about 15 minutes to make & 5 minutes to fit... cool little mod
i replace the bolts with 4 stainless button head 3/8" bolts.
I tapped the top spacer/bush on the lift kit and the origonal bottom mount on the frame to 3/8" UNC
Will post a couple of pics when I get time just got outta bed after a 16 hr day at work.....
i replace the bolts with 4 stainless button head 3/8" bolts.
I tapped the top spacer/bush on the lift kit and the origonal bottom mount on the frame to 3/8" UNC
Will post a couple of pics when I get time just got outta bed after a 16 hr day at work.....
#17
RE: 2" or 3" tank lift
here are some pics, 1st is a before shot then the others are of before i replaced the bottom bolt with button head bolts
[IMG]local://upfiles/41024/09D55E1EA5404A349A18C0277279934C.jpg[/IMG]
[IMG]local://upfiles/41024/0E39E448E916442AA986BF3E0FAB1709.jpg[/IMG]
[IMG]local://upfiles/41024/F0862C78B7794E8084957A3AF2944ABC.jpg[/IMG]
[IMG]local://upfiles/41024/7E40681D689740C2B09BACE34E2D8B4B.jpg[/IMG]
[IMG]local://upfiles/41024/BB253A7187594494A79261A4128D9EB5.jpg[/IMG]
[IMG]local://upfiles/41024/09D55E1EA5404A349A18C0277279934C.jpg[/IMG]
[IMG]local://upfiles/41024/0E39E448E916442AA986BF3E0FAB1709.jpg[/IMG]
[IMG]local://upfiles/41024/F0862C78B7794E8084957A3AF2944ABC.jpg[/IMG]
[IMG]local://upfiles/41024/7E40681D689740C2B09BACE34E2D8B4B.jpg[/IMG]
[IMG]local://upfiles/41024/BB253A7187594494A79261A4128D9EB5.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post