Hello From Tampa Florida Area...Street Bob Handle Bar Swap Question
#1
Hello From Tampa Florida Area...Street Bob Handle Bar Swap Question
I get to ride ALL year long here in FLA. I picked up an 08 Street Bob and I love it. I am looking to change out the ape handle bars to the straight type of bars....can anybody put me in the right direction as far as risers....swappable parts....anything that may need to change other than the obvious??
Thanks
Pat
Thanks
Pat
#2
RE: Hello From Tampa Florida Area...Street Bob Handle Bar Swap Question
I assume your looking to put drag bars on it. If so, you could try WildOne drags with intergrated risers. I think they look better versus using straight bars and risers with a hnadlebar clamp. If you want to have them at roughly the same height as your mini apes you won't have to be concerned with changing cables out. They also look great if you take the time to internally wire them as well. There is plenty of slack in the stock harness to do this, all it takes is a little bit of time in the garage.
Here's a link to the WildOne site. http://www.wild1inc.com/
Here's a link to the WildOne site. http://www.wild1inc.com/
#6
#7
RE: Hello From Tampa Florida Area...Street Bob Handle Bar Swap Question
I'm learning that now O.B.....I talked with wild1 and they recommend a W0503 for the Bob. But then I would need to make a top single clamp vs. the two clamps that the Bob has now. I think that should be an easy make.....any other concerns?? here is a pic of what wild1 said would look sweet and work as long as I make the top single clamp...
Trending Topics
#8
RE: Hello From Tampa Florida Area...Street Bob Handle Bar Swap Question
I just went up to my local Harley dealer and bought a set of bras just like those shown....it took 2 hours to put them on...what a difference...I like the look better now.!! thanks guys....if anybody is interested in the part number...just lmk.
#10