chr. duece solid rear rim, chr. biohazard pulley & lindby bar installed (pics)
#21
03-03-2008 | 09:17 AM
Outstanding HDF Member
Joined: Jul 2007
Posts: 3,299
Likes: 2
From: By the "Betty water and the Wire"
#24
03-03-2008 | 09:40 AM
Advanced
Joined: Apr 2006
Posts: 71
Likes: 0
From:
RE: chr. duece rim, chr. biohazard pulley & lindby bar installed (pics)
nice one jackyl
just done the same set up on mine although i have blacked the wheel except for the raised ridges which i have polished put same tyre on as well.I have just finished putting standard 2007 wide glide triple trees on with 6 inch risers internaly wired drag bars which i did myself thanks to this site ,i am justin the process of fitting a fatboy slotted front wheel (black) and have fitted a v rod front fender its looking good so far should be finished in a couple of weeks i will post pics then
cheers gaz
just done the same set up on mine although i have blacked the wheel except for the raised ridges which i have polished put same tyre on as well.I have just finished putting standard 2007 wide glide triple trees on with 6 inch risers internaly wired drag bars which i did myself thanks to this site ,i am justin the process of fitting a fatboy slotted front wheel (black) and have fitted a v rod front fender its looking good so far should be finished in a couple of weeks i will post pics then
cheers gaz
#26
03-03-2008 | 08:18 PM
Thread Starter
|
Elite HDF Member
Joined: Feb 2006
Posts: 4,051
Likes: 8
From: Detroit Michigan
RE: chr. duece rim, chr. biohazard pulley & lindby bar installed (pics)
ORIGINAL: gaz
nice one jackyl
just done the same set up on mine although i have blacked the wheel except for the raised ridges which i have polished put same tyre on as well.I have just finished putting standard 2007 wide glide triple trees on with 6 inch risers internaly wired drag bars which i did myself thanks to this site ,i am justin the process of fitting a fatboy slotted front wheel (black) and have fitted a v rod front fender its looking good so far should be finished in a couple of weeks i will post pics then
cheers gaz
nice one jackyl
just done the same set up on mine although i have blacked the wheel except for the raised ridges which i have polished put same tyre on as well.I have just finished putting standard 2007 wide glide triple trees on with 6 inch risers internaly wired drag bars which i did myself thanks to this site ,i am justin the process of fitting a fatboy slotted front wheel (black) and have fitted a v rod front fender its looking good so far should be finished in a couple of weeks i will post pics then
cheers gaz
#27
03-03-2008 | 08:21 PM
Thread Starter
|
Elite HDF Member
Joined: Feb 2006
Posts: 4,051
Likes: 8
From: Detroit Michigan
RE: chr. duece rim, chr. biohazard pulley & lindby bar installed (pics)
ORIGINAL: dklozik
Im fkn jealous. Im broke so I had to settle for the chrome pulley cover with my chrome deuce wheel. Just for referenceand other peoples benefit... Jackyl, did you machine the wheel yourself or have to have someone else do it ? It cost me 40 to have mine machined. Unless someone buys the deuce wheel from hd, for the dyna, its not exactly a direct bolt on. Again, bikes lookin badass.
Im fkn jealous. Im broke so I had to settle for the chrome pulley cover with my chrome deuce wheel. Just for referenceand other peoples benefit... Jackyl, did you machine the wheel yourself or have to have someone else do it ? It cost me 40 to have mine machined. Unless someone buys the deuce wheel from hd, for the dyna, its not exactly a direct bolt on. Again, bikes lookin badass.
. yes i bored mine out at workto 1.260in. for the sleeve.
#28
03-03-2008 | 08:25 PM
Intermediate
Joined: Sep 2007
Posts: 49
Likes: 0
#29
03-03-2008 | 08:43 PM
Intermediate
Joined: Dec 2007
Posts: 47
Likes: 0
From:
#30
03-03-2008 | 08:47 PM
Thread Starter
|
Elite HDF Member
Joined: Feb 2006
Posts: 4,051
Likes: 8
From: Detroit Michigan
RE: chr. duece rim, chr. biohazard pulley & lindby bar installed (pics)
ORIGINAL: mmontgomery
jackyl looks awesome! you buy the rim new? what is the rim size?what was the part number? would love to do the same on my 06 superglide but cant seem to find a rim!
jackyl looks awesome! you buy the rim new? what is the rim size?what was the part number? would love to do the same on my 06 superglide but cant seem to find a rim!