I need some help with front turn signals
#13
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
ORIGINAL: Travlinman314
Now I've got a silly question kind of concerning lilrooster's not wanting to solder.
I also relocated front signals with on the first week I had the bike to the HD Fugly ones.
At that time, I did cut the wires and just crimped the wires together with electrical connectors and taped them up.
Rode for a couple of weeks that way, till I found an alternative to the Fugly kit.
I then did a home made tank lift, and homemade relocation kit, then I finally soldered the wires.
This being said, I honestly and probably would never have soldered the wires toghther if it weren't for reading it in this forum.
What would, or could have happened if I would have just left them crimped and taped?
Just curious....
Now I've got a silly question kind of concerning lilrooster's not wanting to solder.
I also relocated front signals with on the first week I had the bike to the HD Fugly ones.
At that time, I did cut the wires and just crimped the wires together with electrical connectors and taped them up.
Rode for a couple of weeks that way, till I found an alternative to the Fugly kit.
I then did a home made tank lift, and homemade relocation kit, then I finally soldered the wires.
This being said, I honestly and probably would never have soldered the wires toghther if it weren't for reading it in this forum.
What would, or could have happened if I would have just left them crimped and taped?
Just curious....
#14
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Got the very same situation... what I've found is two choices.. remove tank and work wire harness area and connectors ... or...disconnect batt, and/or main fuse, cut wires, reroute wires under steering neck, solder back together andheat shrink tube them then tie wrap in place. Finallygot a heat gun for shrink tubing.. old method of using cig lighter seemed alittledangerous that close to the gas tank... LOL R/ Ed H
[IMG]local://upfiles/44748/E5D3423120154211AEC99E92FD803DDC.jpg[/IMG]
[IMG]local://upfiles/44748/E5D3423120154211AEC99E92FD803DDC.jpg[/IMG]
#15
Thread
Thread Starter
Forum
Replies
Last Post
RandyDowdy
Ignition/Tuner/ECM/Fuel Injection
19
08-25-2010 10:10 AM