* HOW TO * under fifty bux *
#981
Sorry I missed your question earlier jarhead.
I've changed quite a few things since poking it and stroking it to 121 inchs.
This is the Doherty A/C, but they supply chickensh.t plastic fittings
along with their 300 buck assembly.
The Brass fittings are commonly found at Plumbing Supply houses,
better Auto Parts dealers, online at McMaster Carr, etc etc.
Billet mini catch can by Golan Made in the USA - part # 66-2110-6731
look near the bottom on this page
http://www.nrhsperformance.com/partscarburetion.shtml
I have all the pix for a step by step on this one,
just need to find time to post it up.
mud...........
.
#982
.
Installing an Oil Temperature Gauge,
last step was to pickup 12 volts keyed, and a ground.
There it was, less than a foot away.
First picture here shows the bottom side of
my 06 FXD Fuel Gauge.
No wire cutting,
and there is a conduit provided on the stock grommet.
Cost?? Two fittings.
.
Next picture shows wires exiting the conduit from below.
Easy money.
mud..............
.
Installing an Oil Temperature Gauge,
last step was to pickup 12 volts keyed, and a ground.
There it was, less than a foot away.
First picture here shows the bottom side of
my 06 FXD Fuel Gauge.
No wire cutting,
and there is a conduit provided on the stock grommet.
Cost?? Two fittings.
.
Next picture shows wires exiting the conduit from below.
Easy money.
mud..............
.
#983
Join Date: Mar 2007
Location: Chicago suburbs (Elgin/Schaumburg)
Posts: 19,481
Likes: 0
Received 25 Likes
on
23 Posts
Sorry I missed your question earlier jarhead.
I've changed quite a few things since poking it and stroking it to 121 inchs.
This is the Doherty A/C, but they supply chickensh.t plastic fittings
along with their 300 buck assembly.
The Brass fittings are commonly found at Plumbing Supply houses,
better Auto Parts dealers, online at McMaster Carr, etc etc.
Billet mini catch can by Golan Made in the USA - part # 66-2110-6731
look near the bottom on this page
http://www.nrhsperformance.com/partscarburetion.shtml
I have all the pix for a step by step on this one,
just need to find time to post it up.
mud...........
.
I've changed quite a few things since poking it and stroking it to 121 inchs.
This is the Doherty A/C, but they supply chickensh.t plastic fittings
along with their 300 buck assembly.
The Brass fittings are commonly found at Plumbing Supply houses,
better Auto Parts dealers, online at McMaster Carr, etc etc.
Billet mini catch can by Golan Made in the USA - part # 66-2110-6731
look near the bottom on this page
http://www.nrhsperformance.com/partscarburetion.shtml
I have all the pix for a step by step on this one,
just need to find time to post it up.
mud...........
.
MUD this is fantastic! i love that oil pressure line man... god you are good man... very cool! thanks!
#985
Thanks for the compliment JRK.
Moved the line now when I installed a different Oil Pressure Gauge
and Oil Temperature, mounted up top.
mud............
.
.
.
.
#986
#987
#988
Join Date: Mar 2007
Location: Chicago suburbs (Elgin/Schaumburg)
Posts: 19,481
Likes: 0
Received 25 Likes
on
23 Posts
MUD YOU HAVE A SHIFT LIGHT!!!! OOH MAN! I NEEEEEED TO KNOW HOW YOU DID THAT! crap man you come up with the cooooooolest mods! man, just awesome! PLEASE break that down for me if you can... i would love to have that set up on my ride! man i love all that you have done to your bike, between the tank, fenders... now the motor... Jelous... that i am!
#989
Can't get much cheaper than this.
Good thinking sloMo.
Looks good too.
mud