* HOW TO * under fifty bux *
#511
RE: HOW TO - under fifty bux
ORIGINAL: mudpuddle
mike, you musta missed the part where HEVIL said "just kiddin".
mud
ORIGINAL: metal_mike
my 1st language is english....but youre gonna have to translate that one.... i got nothin'
ORIGINAL: UPHEVIL
dude love the no plug for the trim ring i wont tell .... but i was thinking you should wrap it in leather.... or if you acumilate (yeah what ever) enough car part you can have a hot rod....just kiddin get back to work
dude love the no plug for the trim ring i wont tell .... but i was thinking you should wrap it in leather.... or if you acumilate (yeah what ever) enough car part you can have a hot rod....just kiddin get back to work
my 1st language is english....but youre gonna have to translate that one.... i got nothin'
mike, you musta missed the part where HEVIL said "just kiddin".
mud
b.t.w. way to pound those tanks into submission!
#512
#513
RE: HOW TO - under fifty bux
ORIGINAL: metal_mike
lol didnt miss it... just didnt quite understand it
b.t.w. way to pound those tanks into submission!
ORIGINAL: mudpuddle
mike, you musta missed the part where HEVIL said "just kiddin".
mud
ORIGINAL: metal_mike
my 1st language is english....but youre gonna have to translate that one.... i got nothin'
ORIGINAL: UPHEVIL
dude love the no plug for the trim ring i wont tell .... but i was thinking you should wrap it in leather.... or if you acumilate (yeah what ever) enough car part you can have a hot rod....just kiddin get back to work
dude love the no plug for the trim ring i wont tell .... but i was thinking you should wrap it in leather.... or if you acumilate (yeah what ever) enough car part you can have a hot rod....just kiddin get back to work
my 1st language is english....but youre gonna have to translate that one.... i got nothin'
mike, you musta missed the part where HEVIL said "just kiddin".
mud
lol didnt miss it... just didnt quite understand it
b.t.w. way to pound those tanks into submission!
Was gonna ask HEVIL, you beat me to it.
I picked up another tank from HDFDyna brother MDodson.
He mentioned it a few pages back.
I am going to section it down to about 2 and a half inchs more narrow.
mud
#515
RE: HOW TO - under fifty bux
ORIGINAL: HOGRIDA_06
Mud, great job putting together the index.
Last week I put together my Ooga Booga A/C cover bolt and today I made my bullet key.
For my key I had a buddy make me a dummy round, he gave me a S&W 500 MAG.
I don't know much about guns and ammo but thats one big pistol round.
I'll try to get some pics. up this weekend.
Mud, great job putting together the index.
Last week I put together my Ooga Booga A/C cover bolt and today I made my bullet key.
For my key I had a buddy make me a dummy round, he gave me a S&W 500 MAG.
I don't know much about guns and ammo but thats one big pistol round.
I'll try to get some pics. up this weekend.
mud
#516
RE: HOW TO - under fifty bux
Mud,
You don't seem to be short any time for taking pics (thank goodness - i've learned more from your tuts and pics than just a description). You considered filming some of your work and slapping the video up on youtube or google video, etc so we can see you pound that metal into submission? Even the cheapie digital cameras have a film option on them these days.
I'd love to see how you handled that tank. No doubt some others here would too. Especially those of us who don't have the tools and knowhow that you do.
You don't seem to be short any time for taking pics (thank goodness - i've learned more from your tuts and pics than just a description). You considered filming some of your work and slapping the video up on youtube or google video, etc so we can see you pound that metal into submission? Even the cheapie digital cameras have a film option on them these days.
I'd love to see how you handled that tank. No doubt some others here would too. Especially those of us who don't have the tools and knowhow that you do.
#517
RE: HOW TO - under fifty bux
[/quote]
Good questions Ray, thanks.
Here are some better pix of the beat tool.
I like wood for this type of beating. White Pine in this case.
First picture below shows both ends, which are shaped slightly different,
and a leather mallet.
This next picture shows the narrow end.
Notethat the "narrow"surface is also slightly rounded.
The edges that run the length are eased,
so you can hang on to the apparatus comfortably
during a lengthy beating.
The "narrow" surface was used first along the green horizontal line.
Love taps at first, progressing to a more violent striking action
as the operation proceeds.
The other end is about twice as wide.
I used this after the green line was punched in about a half inch
Work outward progressivelyfrom the green line.
You cannot jump around from here to there.
You're question about "like a chisel" -
Don't quite follow you, but. I think the answer is no.
The intrument is struck in a "straight on" manner.
Then the AllMetal.
mud
[/quote]
Very, very nice! ... Excellent description
thank you for the follow-up.
Ray.
#518
RE: HOW TO - under fifty bux
ORIGINAL: XKROME
hey Mud, i lost some of the photo's in my earlier posts cuz of Photobucket
so i'll delete those and repost when i get her back together
(boots are supposed to be here Feb. 4th)
ORIGINAL: mudpuddle
Starting to work on an index to edit into post#1 page 1
mud
Starting to work on an index to edit into post#1 page 1
mud
so i'll delete those and repost when i get her back together
(boots are supposed to be here Feb. 4th)
Thanks. Appreciate the help.
You've added quite a bit to this topic.
Keep em comin.
mud
#519
RE: HOW TO - under fifty bux
ORIGINAL: Dawg Rider
Dang, Mud, you don't play!
I was thinking I would have time this afternoon to help with that index,
but you've already got it whooped.
Probably just as well- by the time you sorted through somebody else's stuff
you could probably have done it yourself.
Dang, Mud, you don't play!
I was thinking I would have time this afternoon to help with that index,
but you've already got it whooped.
Probably just as well- by the time you sorted through somebody else's stuff
you could probably have done it yourself.
I think the index on page one will be an asset.
Anyone with comments or suggestions on the index formatting, speak up.
I am still working on the layout.
mud
#520
RE: HOW TO - under fifty bux
ORIGINAL: strich
Mud,
You don't seem to be short any time for taking pics
(thank goodness - i've learned more from your tuts and pics than just a description).
You considered filming some of your work and
slapping the video up on youtube or google video, etc
so we can see you pound that metal into submission?
Even the cheapie digital cameras have a film option on them these days.
I'd love to see how you handled that tank.
No doubt some others here would too.
Especially those of us who don't have the tools and knowhow that you do.
Mud,
You don't seem to be short any time for taking pics
(thank goodness - i've learned more from your tuts and pics than just a description).
You considered filming some of your work and
slapping the video up on youtube or google video, etc
so we can see you pound that metal into submission?
Even the cheapie digital cameras have a film option on them these days.
I'd love to see how you handled that tank.
No doubt some others here would too.
Especially those of us who don't have the tools and knowhow that you do.
A video would be real nice to have, wouldn't have to stop and snap.
A time saver for sure, And I don't have a lot of time left to waste.
As to the tank beatin, I considered for a week or so
before I struck the first blow.
Once you get started with a beatin like that,
there ain't no turnin back.
mud