* HOW TO * under fifty bux *
#2171
#2172
This looks like a good thread with lots of great info, but since the majority of the pics are hosted on Photobucket, which doesn't allow 3rd party hosting anymore, or some other local hosting service which is not there, so none of them are visible, so these mods are mostly useless. Would it be possible to get these fixed, so those of us who are "new" here can see and use them?
#2173
This looks like a good thread with lots of great info, but since the majority of the pics are hosted on Photobucket, which doesn't allow 3rd party hosting anymore, or some other local hosting service which is not there, so none of them are visible, so these mods are mostly useless. Would it be possible to get these fixed, so those of us who are "new" here can see and use them?
Or you can put the thumbnails in your album right here on HDF.
As for all the pictures already put up from photo bucket,,,,, I don't know if there is a solution other than the original poster re-posting them.
You can PM that poster and ask for pix.
The following users liked this post:
ABQ-Jammer (11-10-2017)
#2174
DIY breather for ness stage 1 kits
I'm working on this as we speak. So far this is what i've got.
2- 90* 6mm pushlok fittings (1/8pt)
1- 6mm pushlok tee
6 or so feet of 6mm pushlok
21/64 drill bit
1/8pt tap
i need a cool idea for the filter element/drip collector. i saw another member used an airplane bottle of jack.
2- 90* 6mm pushlok fittings (1/8pt)
1- 6mm pushlok tee
6 or so feet of 6mm pushlok
21/64 drill bit
1/8pt tap
i need a cool idea for the filter element/drip collector. i saw another member used an airplane bottle of jack.
#2175
#2176
Post from
Here's a how to restore (Photobucket's disabled) images write-up.
1. Click "Edit" in your post where images are diabled
2. Left click the image and it turns blue
3. Now right click the image and left click "Open image in new screen"
4. Left click the new opened screen in Photobucket. In case there's an add remove it
5. Right click the image
6. Left click "Copy image"
7. Left click the screen at HDF where you started this sequense
8. Left click the image and click "delete" on your keuboard
9. Left click the "insert image button" on top of the editor
10. Right click in the "Paste a picture URL" and left click "Paste"
11. Left click the green "Insert" button
12. Check your initial post for the result
13. Click "Save"
FXD2003Rider
Here's a how to restore (Photobucket's disabled) images write-up.
1. Click "Edit" in your post where images are diabled
2. Left click the image and it turns blue
3. Now right click the image and left click "Open image in new screen"
4. Left click the new opened screen in Photobucket. In case there's an add remove it
5. Right click the image
6. Left click "Copy image"
7. Left click the screen at HDF where you started this sequense
8. Left click the image and click "delete" on your keuboard
9. Left click the "insert image button" on top of the editor
10. Right click in the "Paste a picture URL" and left click "Paste"
11. Left click the green "Insert" button
12. Check your initial post for the result
13. Click "Save"
#2177
Of course you need a printer that can do CD's, but the possibilities are endless!
#2178
Thats the one! I did order the two 90dg fittings an had to buy the U clamps. When I had everything it took about a hour to install everything. Since install about 275 miles on an no issues. Oil changes now will be a breeze, no drips, runs or errors.
This is how I know the temps before an after the unit.
Attachment 504189
This is how I know the temps before an after the unit.
Attachment 504189
#2179
I didn't like how much blueing my Twobros SS exhaust had turned. Did a lot of research and found several specific products, but I was too impatient to wait. I picked up some Bartenders Friend powder at the grocery store. This is
the end, or near end, result:
Maybe 15m on each pipe and the muffler.
the end, or near end, result:
Maybe 15m on each pipe and the muffler.
The following 2 users liked this post by boneill:
NMU (07-14-2019),
Silver Wombat (03-04-2019)