Avg HP and Torque before and after Stage 1?
09-20-2007 | 06:19 AM
Joined: Mar 2007
Posts: 127
Likes: 0
From:
Avg HP and Torque before and after Stage 1?
Just wondering if anyone might have or may have found somewhere these numbers for an 06 or 07 96 cu in Harley engine. Would be very interesting to see.
Thanks
Tom
09-20-2007 | 06:35 AM
Joined: May 2006
Posts: 10,815
Likes: 16
From: Virginia
RE: Avg HP and Torque before and after Stage 1?
From the nightrider site
2007 HD Dyna Dyno Sheet
09-20-2007 | 03:04 PM
Joined: May 2006
Posts: 26
Likes: 0
From:
RE: Avg HP and Torque before and after Stage 1?
my 07 street bob put down 76 HP and 87 TQ with cycle shack muffs and SE AC, and a Dyno tune.
09-20-2007 | 10:26 PM
Joined: Jul 2007
Posts: 51
Likes: 0
RE: Avg HP and Torque before and after Stage 1?
Just did the dyno tune on my 07 super glide. Squeezed 91 ft lb and 77 hp withV&H straight shot slipon with quiet baffle, SE AC, SERT.
[IMG]local://upfiles/38209/8BAEEB1BCCCB4E8EB73295EA31C89E48.jpg[/IMG]
09-20-2007 | 10:36 PM
Joined: Sep 2007
Posts: 3,359
Likes: 2
From: MA
RE: Avg HP and Torque before and after Stage 1?
With the V&H Big Radius, air cleaner, and Power Commander, mine Dyno'd at 78 1/2 HP. I don't recall what the torque reading was.
Stupid question, what is "stage 1"?
09-20-2007 | 11:14 PM
Joined: May 2006
Posts: 10,815
Likes: 16
From: Virginia
RE: Avg HP and Torque before and after Stage 1?
Stage 1 is typically pipes and air cleaner replacement.
09-20-2007 | 11:25 PM
Joined: Aug 2006
Posts: 2,976
Likes: 1
From:
RE: Avg HP and Torque before and after Stage 1?
06 SuperGlide............. Drilled pipes, K&N Full Flow, TFI = Stage1............. 74HP 78 lbs TQ
DougJ
09-20-2007 | 11:44 PM
Joined: Jul 2007
Posts: 1,101
Likes: 2
From: The Left Coast
RE: Avg HP and Torque before and after Stage 1?
Quote:
ORIGINAL: PigInaBlanket
Stage 1 is typically pipes and air cleaner replacement.
duh..
09-20-2007 | 11:47 PM
Joined: Sep 2007
Posts: 3,359
Likes: 2
From: MA
RE: Avg HP and Torque before and after Stage 1?
Quote:
ORIGINAL: PigInaBlanket
Stage 1 is typically pipes and air cleaner replacement.
Got it, thanks. I guess I have stage 1 covered...lol I thought it was a specific equpment mod from HD.
09-21-2007 | 12:10 AM
Joined: Jul 2007
Posts: 1,101
Likes: 2
From: The Left Coast
RE: Avg HP and Torque before and after Stage 1?
Quote:
ORIGINAL: DougsDyna
06 SuperGlide............. Drilled pipes, K&N Full Flow, TFI = Stage1............. 74HP 78 lbs TQ
DougJ
'07 superglide ..hauls a$$...kicks a$$..an' mo' betta than yers!! [sm=biker.gif]