Compensator Issues 03 FXDWG
#1
Compensator Issues 03 FXDWG
Been having some noise what sounds like it's coming from the Primary Case. I took the primary apart, decided to replace the inner primary bearing & race while I was in there( was worn some). Replaced all seals & removed the Compensator to look it over and in the pics you'll see where it's worn down both on the Sprocket and inner shaft . Is this normal or is this typical on Compensators. I may replace it any ways.
Worn on this side
Not worn
Not
Worn
Worn on this side
Not worn
Not
Worn
Last edited by EppsHD; 06-22-2024 at 09:07 PM. Reason: Did not post Year & Model
#2
I don't see anything that looks concerning. The OEM unit is now only available as individual parts. So about $600 to replace three parts. The early TC compensator is pretty robust.
So how many miles on the bike? What about the condition of the primary chain? They can get noisy when they wear out.
So how many miles on the bike? What about the condition of the primary chain? They can get noisy when they wear out.
#4
I don't see anything that looks concerning. The OEM unit is now only available as individual parts. So about $600 to replace three parts. The early TC compensator is pretty robust.
So how many miles on the bike? What about the condition of the primary chain? They can get noisy when they wear out.
So how many miles on the bike? What about the condition of the primary chain? They can get noisy when they wear out.
Last edited by EppsHD; 06-22-2024 at 11:18 PM. Reason: Add to
#5
#7
Trending Topics
#8
#9
#10