Got the bolts back in and installed

 

 

Got the badges and console off the tank and removed the tank to get ready to paint it. Next to remove the rear rocker box to replace the gasket.

 

I need to do this also.

Pulled the trigger on the Saddlemen mini fxrt fairing today. It's a preorder and should ship around March 1st

 

After a ride on New Years Day 2023 I decided that enough was enough, my primary belt drive was loose and had an issue. After talking to Ultima I decide the bearing in the clutch hub is done. Took forever to find a replacement, then it was a project to press out the old one and press in a new one. Got that done, belt was tight again, bearing was definitely the issue. Get the bike back together and the hydraulic clutch feels weird, clutch dragging etc. Started another thread on here about bleeding the Magura unit, that took a bunch of emails to manufacturer, then doing it.

All told it took almost one year from initial disassembly, but Saturday she got out of the basement and went for a ride. Clutch is back to being all good the rest of the bike besides being dirty ran like she had been out for a 100 mile ride the day before. Such a good motorcycle, always does what she is supposed to even after being laid up for a while. The reward, she is coming with me to Daytona in a couple of weeks, she has not been there in a lot of years.

Very happy to have my Dyna back in the rotation.

 

Thank you sir, I really like your bike too with the high neck stretched frame. I would love to do the same to my bike.

 

 

What's all getting painted, new color?

 

If you look closely in this photo you can actually see the rubber seal behind the pulley.

Thanks a lot for helping me with this, I really like how it turned out.

Now to find a 21" mag wheel for the front

 

Narrow or Wide Glide? I have nice HD Mag wheel for the front, 21" for a wide glide.