What did you do to your Dyna today? ** Part 2 **
#501
#502
T-Bar Jesus came to me in a vision and said “Put a fairing on that bitch” so I did.
Memphis Shades Road Warrior with 21” screen.
Memphis shades was no help in figuring out what I needed since I converted my FXDF to a single headlight.
I used the fairing and brackets for the FXDWG and the headlight extension block for the FXDB.
everything fit perfect.
also trying out the reduced reach forward control brackets.
Memphis Shades Road Warrior with 21” screen.
Memphis shades was no help in figuring out what I needed since I converted my FXDF to a single headlight.
I used the fairing and brackets for the FXDWG and the headlight extension block for the FXDB.
everything fit perfect.
also trying out the reduced reach forward control brackets.
Last edited by NewGuyGeoff; 05-21-2024 at 08:58 PM. Reason: More info
The following 5 users liked this post by NewGuyGeoff:
Dynawobble (05-21-2024),
Madmura (05-24-2024),
mte78 (05-24-2024),
Paintslinger16 (05-21-2024),
Tom H (05-21-2024)
#504
The following 7 users liked this post by mte78:
98hotrodfatboy (05-24-2024),
Chad1200 (05-24-2024),
Dynawobble (05-24-2024),
Madmura (05-24-2024),
NEWROADSTER (05-24-2024),
and 2 others liked this post.
#505
Spent all day yesterday replacing my lighting. I liked the way the moons looked but they didn't throw the light where I needed it. If I didn't have my high beams on I couldn't see squat. I love how the bajas turned out though. And boy do they throw some light out. And the spread is amazing into turns. For whatever my opinion is worth it was a good upgrade. Also finally matched the pod hardware to the windshield with black arps. My friend made me a custom bracket for the light also that is really slick. I can't post a picture of that as he's possibly going after a patent. Mine is the prototype and I'm extremely honored. Top pick is obviously the moons lighting. Cheers everyone!
The following 4 users liked this post by Dynawobble:
Chad1200 (05-28-2024),
Chicago Ken (06-20-2024),
Paintslinger16 (05-26-2024),
snake_eyes (05-27-2024)
The following users liked this post:
Dynawobble (05-26-2024)
The following users liked this post:
98hotrodfatboy (05-26-2024)
#508
Typing this from the garage lmao. Never again with matchy match aluminum sprockets. Got 10k miles out of the last one. Went back to steel Bungking. Also dropped it down another tooth so I'm sitting at 24/52. Also had my rear peg mounts powdered and finally added the arp hardware for them. I have a set of boostedbrad bear traps to match the front but they're still at powder.
The following users liked this post:
snake_eyes (05-29-2024)
#509
The following users liked this post:
Dynawobble (05-28-2024)
#510
I ran aluminum once and with good power, it actually made the teeth look like waves in the ocean as they were curling over, never again.. steel is a little harder on e chains but it'll last a hell of a lot longer..
The 24/52 should give you good cruise at 70 mph, roughly 2850 rpm...
The 24/52 should give you good cruise at 70 mph, roughly 2850 rpm...