Chrome Coil Cover Problem?
#1
Chrome Coil Cover Problem?
On my '07 FXDC...I put the bracket on to hold the new chrome coil cover I'm putting on fine.I then slide the new chrome over the plug holes & try to position it in place, put it looks like the chrome coverright edge is going to rub up against the fuse box cover? Is it supposed to rub up against it before getting into place where your able to install the 3 attaching screws? (Problem #1)
Problem # 2 is I then decided to take the fuse box cover off so as to not get scratched by the chrome coil cover then I was going to put it back on after the coil cover was installed. However, both screws just spin in place on the fuse cover & don't come out? Is there another way of taking the fuse box cover off other then these 2 screws?
Problem # 2 is I then decided to take the fuse box cover off so as to not get scratched by the chrome coil cover then I was going to put it back on after the coil cover was installed. However, both screws just spin in place on the fuse cover & don't come out? Is there another way of taking the fuse box cover off other then these 2 screws?
#3
RE: Chrome Coil Cover Problem?
I also would like to cover the coils on my '07 Street Bob, but not with the chrome part with thedouble slash detail from theHD catologue, it doesnt go with fuse box cover and there isn't a chrome box cover with 2 slashes to go with that either. Is there a wrinkle black cover that suits the stock fuse box cover with a single slash, there is a chrome part with a single slash that is astock part on 2 other Dynas, but would it fit theBob, iwould like to keep itblack though,the bike is already getting a bit shiny.Any suggestions?
#4
#5
RE: Chrome Coil Cover Problem?
ORIGINAL: FXDC Rider
OK??? So the fuse box cover just pulls off, huh?
What a dumb freakin'-*** design!
.................................................. ..........................
OK??? So the fuse box cover just pulls off, huh?
What a dumb freakin'-*** design!
.................................................. ..........................
I also thought it was pretty cool of HD
to provide me with an owner's manual
outlining precisely how to remove the fuse cover.
mud
#6
RE: Chrome Coil Cover Problem?
I also thought it was pretty cool of HD
to provide me with an owner's manual
outlining precisely how to remove the fuse cover.
mud
to provide me with an owner's manual
outlining precisely how to remove the fuse cover.
mud
If we were all book worms & smart-***'s like you I guess we wouldn't need a message board to talk back & forth about issues/problems...we'd all just pull out our manuals like I guess you do everytimewe have a problem?
If all your gonna do is add a cocky, smartalic remark & waste space on someone's post then MIND YOUR OWN FUC%IN' BUSINESS!
#7
Trending Topics
#9
RE: Chrome Coil Cover Problem?
ORIGINAL: lone rider
I also would like to cover the coils on my '07 Street Bob, but not with the chrome part with thedouble slash detail from theHD catologue, it doesnt go with fuse box cover and there isn't a chrome box cover with 2 slashes to go with that either. Is there a wrinkle black cover that suits the stock fuse box cover with a single slash, there is a chrome part with a single slash that is astock part on 2 other Dynas, but would it fit theBob, iwould like to keep itblack though,the bike is already getting a bit shiny.Any suggestions?
I also would like to cover the coils on my '07 Street Bob, but not with the chrome part with thedouble slash detail from theHD catologue, it doesnt go with fuse box cover and there isn't a chrome box cover with 2 slashes to go with that either. Is there a wrinkle black cover that suits the stock fuse box cover with a single slash, there is a chrome part with a single slash that is astock part on 2 other Dynas, but would it fit theBob, iwould like to keep itblack though,the bike is already getting a bit shiny.Any suggestions?
Good Luck
Tom