how long did the install take?

 

The Kuryakyn panacea kit is awesome. I had it on my sporty and put it on my fxdl. If you get the panacea tailight and the panacea turn signal inserts youll have red running lights and the turn signals will flash amber when you hit them, you also get an amber arrow pointing in the direction of your turn in your brake light. You can also make the brake light and turn signals flash red when you hit the brakes. But be sure to order the panacea turn signal inserts and not just the led inserts. Link here

http://www.customdynamics.com/harley...al_panacea.htm

 

The panacea kit is nice also but some guys don't like the built in turn signal arrows so that is why kuryakyn sells the standard kit like I bought. to each their own. either way you go your rear end is going to be bright and you will be seen for sure!!!

 

Silverbullet - when youconvert your front signalsyou will probablly notice your front and rear signal lights will rapid flash. If this occurs you will need to install the load equalizer (included in your kit ). I just did my 06 Bobster and had no problems with just the rear done, but when I added the front ... the rapid flash occured. Once the load equalizer was added, problemfixed .

 

Thanks for the heads up, I've heard the same thing a few times from other dyna owners. I'm hoping to get the fronts soon!

 

did you have to install load equalizers? I just installed mine and get the fast blink. I don't know much about wiring and this is exactly what I was hoping to avoid.

 

Very nice, is that the screaming eagle seat? Do you like it? I know it looks sharp, how is the comfort?

 

I didn't have to install the load equalizer because I only installed the rear set, when I install the front set I believe I'll need the load equalizer which is what a few other members said as well. the instructions say to install the lenses then turn on the signals to check if they operate normal. If not then the load equalizer is needed.

 

Yes the seat on my bike is the Screaming Eagle 2 up seat which comes stock on the Screaming Eagle 110 bikes. I love the seat and haven't heard any complaints from my wife who rides with me on occasion. The only problem with the seat is that you need to take it off when washing the bike because the center of the seat and passenger sections are perforated which lets water soak in. I just remove the seat and use a plastic bag to cover the battery and electrical connections.

 

WOW! They look cool, already got the tail light must finish it off with the winkers, it's the only logical thing to do.

[IMG]local://upfiles/39204/AFDBEE502B4145A79D64F359A0B40122.jpg[/IMG]