Dyna Glide Models Super Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Sponsored by:
Sponsored by:

Tank Emblems

Thread Tools
 
Search this Thread
 
  #1  
Old 07-28-2007 | 08:32 AM
twofish's Avatar
twofish
Thread Starter
|
Road Master
Joined: Apr 2007
Posts: 1,197
Likes: 0
From: USA
Default Tank Emblems


Tank Emblems Gone.
http://www.putfile.com/twofishrichard/images/131604
It took me 15 min to removed the right side tank emblem and clean it up.
The left side for some reason took 3 hrs? There’s still a very faint area
where you can tell something was there. I need to rub it out someday.
The vivid black works well for me on a blank tank.

 
  #2  
Old 07-28-2007 | 08:37 AM
js1268's Avatar
js1268
Banned
Joined: Jan 2007
Posts: 371
Likes: 0
From:
Default RE: Tank Emblems

i did the same thing for my vivid black bob... just ordered a pair of bar-and-shield emblems to replace the script ones
 
  #3  
Old 07-28-2007 | 08:47 AM
Cornhusker's Avatar
Cornhusker
Outstanding HDF Member
Joined: Dec 2006
Posts: 2,027
Likes: 4
From: Eastern NE
Default RE: Tank Emblems

I'm planning on taking mine off too. I always use the blow drier to remove the fork and rear fender reflectors. Hope that will work on the tank also.

 
  #4  
Old 07-28-2007 | 08:56 AM
voyager1's Avatar
voyager1
Outstanding HDF Member
Joined: Jun 2006
Posts: 3,432
Likes: 0
From: SW Ohio
Default RE: Tank Emblems

i took mine off too. i also can see a area where they were.wonder how to fix this ?
 
  #5  
Old 07-28-2007 | 09:10 AM
jackyl's Avatar
jackyl
Elite HDF Member
Joined: Feb 2006
Posts: 4,051
Likes: 8
From: Detroit Michigan
Default RE: Tank Emblems

i love it since i took mine off. makes the bike look alot fuller. great look. jackyl
 
  #6  
Old 07-28-2007 | 09:10 AM
twofish's Avatar
twofish
Thread Starter
|
Road Master
Joined: Apr 2007
Posts: 1,197
Likes: 0
From: USA
Default RE: Tank Emblems

voyager1
Turtle Wax Bug and Tar Remove helped a lot.
A few more times and it may be gone altogether?
If not I may have it rubbed out by a pro.

I used WD40 on my front reflectors and Goo Gone on the rear.
http://www.putfile.com/twofishrichard/images/131604
Not much difference IMO between either one.
I didn’t have a hair dryer, however the air temp was 90.
The Ultra Classic 2000 tank emblem looks nice.

 
  #7  
Old 07-28-2007 | 09:14 AM
jackyl's Avatar
jackyl
Elite HDF Member
Joined: Feb 2006
Posts: 4,051
Likes: 8
From: Detroit Michigan
Default RE: Tank Emblems

hey twofish. just looked at your gallery pics, it is amazing what it does for the bike without the emblem, i love the look. bike is looking good, keep it up. jackyl
 
  #8  
Old 07-28-2007 | 09:20 AM
voyager1's Avatar
voyager1
Outstanding HDF Member
Joined: Jun 2006
Posts: 3,432
Likes: 0
From: SW Ohio
Default RE: Tank Emblems

i did stop and see a pro the other day,he used this.took 99% of it off.
http://www.ketone.com/proddetail.php...269e579a9ac5d6

i went to a local shop and bought some. great stuff !!!!!
seems you got to go to a real auto paint store to buy it.. 100% safe too.

the painter that turned me on to this says he has been using it for years.

if you can not find it local.i can pick you up some twofish. let me know .
 
  #9  
Old 07-28-2007 | 09:56 AM
Cornhusker's Avatar
Cornhusker
Outstanding HDF Member
Joined: Dec 2006
Posts: 2,027
Likes: 4
From: Eastern NE
Default RE: Tank Emblems

ORIGINAL: 07 StreetBob

I'm planning on taking mine off too. I always use the blow drier to remove the fork and rear fender reflectors. Hope that will work on the tank also.

Keith


Well, it took all of one minute to heat up the emblems and pull them off. Unfortunately, the rubber is still there in black script. Unlike the fender and slider reflectors, the rubber is thicker and not as dense and now I'm picking it off a small piece at a time. On the fender and sliders, the whole thing came off rubber and all. Once I get most of it off, I'll try and remove the rest with 'OOOPS multi purpose remover. Worked okay on different fenders with no negative effect on the paint. Hopefully, it will do the same on the tank.

 
  #10  
Old 07-29-2007 | 08:09 PM
Cornhusker's Avatar
Cornhusker
Outstanding HDF Member
Joined: Dec 2006
Posts: 2,027
Likes: 4
From: Eastern NE
Default RE: Tank Emblems

ORIGINAL: voyager1

i took mine off too. i also can see a area where they were.wonder how to fix this ?
When I finished mine today, I used my Mequiar's NXT Paste Wax and worked the hell out of both sides and they look almost 100% now. May try more tomorrow but can't really see it anymore.
 


Quick Reply: Tank Emblems



All times are GMT -5. The time now is 01:05 PM.