2014 Street Bob nearly impossible to find neutral?
#11
#12
If a clutch pull adjustment mechanism was put in to make it easier to pull then it can make it harder to get in to neutral. I have one and had to get the clutch adjustment so that there was almost no play in the cable at the lever to be able to get neutral while the bike was running. I didn't have issues with the engine off though so that may not be your issue. Do you feel any clutch drag like the clutch is still somewhat engaged when you pull the lever all the way in?
#13
If a clutch pull adjustment mechanism was put in to make it easier to pull then it can make it harder to get in to neutral. I have one and had to get the clutch adjustment so that there was almost no play in the cable at the lever to be able to get neutral while the bike was running. I didn't have issues with the engine off though so that may not be your issue. Do you feel any clutch drag like the clutch is still somewhat engaged when you pull the lever all the way in?
#14
The following users liked this post:
ABQ-Jammer (07-31-2019)
#15
#16
Sir please consult my other post, clutch was adjusted last night. Granted it may not have done it 100% correctly. I am not trying to blame anything, just want to ride my friend. Thank you.
I will try this. Thank you.
I will try this tonight. Did you experience similar issues?
I will try this. Thank you.
I will try this tonight. Did you experience similar issues?
#17
I’m not sure if this is a joke? Please bear in mind I’ve owned 7-8 bikes, 4 of them Harley’s, my brother owns a 2009 version of the Street Bob, I’ve been riding 10 years, and I’ve been a mechanic 10 years. I’ve done all of the work on my bikes, cars, and current 7.3 powerstroke F250. I am not some idiot.....
#19
But seriously, I haven't seen anyone mention checking shift pawl adjustment. That could be the issue, if everything else is correct. I suspect mine actually needs some adjusting too.
Last edited by F86; 07-31-2019 at 12:48 PM.
The following users liked this post:
crusader1xxx (07-31-2019)