Carb mounting
#11
12-08-2018 | 09:54 PM
Outstanding HDF Member
Joined: Mar 2015
Posts: 2,840
Likes: 900
From: Philly Suburbs
#13
12-08-2018 | 10:46 PM
Outstanding HDF Member
Joined: Mar 2015
Posts: 2,840
Likes: 900
From: Philly Suburbs
Tarik (and maybe Bruce) check my link in this thread HERE
Yup, before installing an R&R Cycles Overflow, I used to run the same SE backing plate (with a horseshoe breather). I know that backing plate is set up to accept the breather vents, but Bruce's description of having a "crossover tube" made me think he was running a similar external vent setup to the one I used... But I guess not?
#14
12-09-2018 | 05:56 AM
Thread Starter
|
Intermediate
Joined: Jan 2018
Posts: 35
Likes: 8
From: S. Florida
Had the bike for a year. Only thing I’ve done is shocks and fork springs, and some carb work. When I worked on the carb I just put it back in the way it came out. It does have the horseshoe breather, but instead of venting to a canister or open, the hose is on a nipple on the backplate with a clamp. Wish I could attach pics. Maybe it’s my phone.
#15
12-09-2018 | 06:27 AM
Club Member
Joined: Oct 2011
Posts: 11,016
Likes: 2,321
From: Nor Cal
Yup, before installing an R&R Cycles Overflow, I used to run the same SE backing plate (with a horseshoe breather). I know that backing plate is set up to accept the breather vents, but Bruce's description of having a "crossover tube" made me think he was running a similar external vent setup to the one I used... But I guess not?
#16
12-15-2018 | 05:24 PM
Thread Starter
|
Intermediate
Joined: Jan 2018
Posts: 35
Likes: 8
From: S. Florida
#17
12-16-2018 | 08:54 PM
Seasoned HDF Member
Joined: Nov 2016
Posts: 5,716
Likes: 788
From: South Carolina
When Multi tells me to do something, I always drop everything and do it (and just did)! He always knows!!!
Yup, before installing an R&R Cycles Overflow, I used to run the same SE backing plate (with a horseshoe breather). I know that backing plate is set up to accept the breather vents, but Bruce's description of having a "crossover tube" made me think he was running a similar external vent setup to the one I used... But I guess not?
Yup, before installing an R&R Cycles Overflow, I used to run the same SE backing plate (with a horseshoe breather). I know that backing plate is set up to accept the breather vents, but Bruce's description of having a "crossover tube" made me think he was running a similar external vent setup to the one I used... But I guess not?
Thread
Thread Starter
Forum
Replies
Last Post
Ray on the drums
EVO
18
09-12-2015 10:28 PM