2009 FXDF project
#47
Not yet. I got to aggressive in a right side curve and tore off some heat wrap so I have to re-wrap the exhaust. Want to repaint it while it's off and fab up a skid plate. Also on my list is the rear motor mount and I want to replace the top motor link and check overall alignment. Weather has been very wet the last week and the shop has been busy so my bike has not been a priority. I'd like to get to it over Thanksgiving but ......
The following users liked this post:
Kevin R (11-18-2018)
#49
#50
Finally getting my bike on the rack. New Rusty Butcher pegs in front. Moved the Biltwell mushman pegs to the back for the lady. They were just to small for forward controls and my size 12 boot. Going to re-wrap the exhaust and maybe come up with a skid plate solution so I don't eat up more wrap in the future. Have a small 120db horn I'm going to hide under the seat area. Never liked horns on the side of the motor anyway,but have to have one to pass inspection on this bike so a hidden horn here I come.
Installation of the CCE rear motor mount is proving to be challenging! After a couple of hours of messing with it yesterday I decided to come back to it today. It doesn't look like it going to work but i'm not calling it yet.
Installation of the CCE rear motor mount is proving to be challenging! After a couple of hours of messing with it yesterday I decided to come back to it today. It doesn't look like it going to work but i'm not calling it yet.