Primary Noise
#21
05-15-2018, 01:19 PM
This is encouraging news. John I ordered them through Amazon simply because I have Prime, but they're on their way. I've watched vids, read your instructions, all really helpful and should be a relatively easy install. Only question I have, is there a specific order for torque-ing the 6 bolts holding the cover on? I got new gaskets for it, just need to know torque and pattern for these bolts.
The following users liked this post:
ROCKOUT Rocker Products (05-15-2018)
#22
05-15-2018, 02:15 PM
This is encouraging news. John I ordered them through Amazon simply because I have Prime, but they're on their way. I've watched vids, read your instructions, all really helpful and should be a relatively easy install. Only question I have, is there a specific order for torque-ing the 6 bolts holding the cover on? I got new gaskets for it, just need to know torque and pattern for these bolts.
When I get home tonight I'll look up the spec/sequence on the bolts.
John @ Rockout
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sporsters
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
#23
05-15-2018, 09:43 PM
Ok, here we go...
Torque is 15-18 ft. lbs. (this is from my '15 Limited manual).
Front cylinder pattern... ML, MR, BL, TR, TL, BR
Rear cylinder pattern... ML, MR, TL, BR, BL, TR
Cheers,
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
Torque is 15-18 ft. lbs. (this is from my '15 Limited manual).
Front cylinder pattern... ML, MR, BL, TR, TL, BR
Rear cylinder pattern... ML, MR, TL, BR, BL, TR
Cheers,
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
#24
05-16-2018, 07:33 AM
Thread
Thread Starter
Forum
Replies
Last Post
BlackFLHR
Touring Models
6
05-03-2010 01:29 PM