i snapped
cable at housing installed new one and when i start it and put into gear my clutch isn't engaging like my clutch lever feels like it has no snap like say you pull your clutch u can feel the point where your clutch pulls it open it doesn't have that I've did adjust every way its not the adjustment

 

It IS the adjustment. Can't be anything else. Go back and do a full up adjustment using the service manual. If that fails, make sure the ball and ramp are seated correctly from when you installed the new cable.

 

+1 with themouth, check the ramp and ***** then do a complete adjustment, the ramp and ***** is what pushing on the clutch rod.

 

.....

 

Usually generated via audio and a phone.

Rarely do we say "period or comma or God forbid, exclamation point!"

Now tilde gets used often...

OP~ pull your case off again and use 3 dabs of grease to keep the ***** in their respective slots.