Dual Gauge / Micky Mouse Set-up Quetions
#41
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,363
Received 2,199 Likes
on
1,685 Posts
#43
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,363
Received 2,199 Likes
on
1,685 Posts
#44
Look for Deutsch Crimper or Molex Crimper at the local electronics or highly-stocked auto parts joint. The jaws have a pretty complex crimp profile to keep from distorting the pins and capture both the conductor and insulator separately.
Amazon and eBay also work, of course.
Do NOT get the crimper type for solid barrel terminals. If the crimper has a round head, it's probably for solid barrels. Your crimpers need to have "plier-type" jaws.
Just one example...
https://www.amazon.com/gp/aw/d/B00GD...PbL&ref=plSrch
Amazon and eBay also work, of course.
Do NOT get the crimper type for solid barrel terminals. If the crimper has a round head, it's probably for solid barrels. Your crimpers need to have "plier-type" jaws.
Just one example...
https://www.amazon.com/gp/aw/d/B00GD...PbL&ref=plSrch
Last edited by cggorman; 11-01-2016 at 07:21 PM.
The following users liked this post:
motorbikemike48 (11-02-2016)
#46
Delphi Packard Five-Cavity Wide-Range Crimper 22-12 AWG / 24-14 AWG, Made in USA, about $ 42.00
http://www.performanceplusconnection.com/Item/WHPT_11E
: Mike
http://www.performanceplusconnection.com/Item/WHPT_11E
: Mike
#47
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,363
Received 2,199 Likes
on
1,685 Posts
ordered the amazon iwss versions just out sheer laziness.
visiting the two fab shops in town tomorow to see if they can work some magic on the LA Chopper mount.
called around some more today and the 1.25 bar clamp thing is past dead... i just love my stock bars.
visiting the two fab shops in town tomorow to see if they can work some magic on the LA Chopper mount.
called around some more today and the 1.25 bar clamp thing is past dead... i just love my stock bars.
Last edited by cvaria; 11-02-2016 at 09:59 PM.
#48
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,363
Received 2,199 Likes
on
1,685 Posts
Gainz
Local metal fab shop trimmed the mount a bit, still not perfect but, i was thinking i'd use some scrap rubber to set it right.
just need wires and connections
crimps showed up today.
should i epoxy coat these ears or leave them wrinkle black?
just need wires and connections
crimps showed up today.
should i epoxy coat these ears or leave them wrinkle black?
Last edited by cvaria; 11-03-2016 at 02:35 PM.
#49
#50
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,363
Received 2,199 Likes
on
1,685 Posts
oh no, i cant do that shiny stuff on the gauges, it will be right in my face when in sunlight. i've already considered powdering the fork trees a few times because of the reflectivity.