Dual Gauge / Micky Mouse Set-up Quetions
#411
Question
I have a 15 street Bob with ignition and dummy lights.
1. Ingnition I will relocate to horn location via big bear mount
2. I'll extend my ignition wires
My question is what do I do with the dummy lights. I see the lowrider tach has a spot on the tach that has the dummy lights. Will big bear harness convert my set up so I no longer have dummy lights separate?
I also see that there is no ignition on lowrider s they use a key fab.
So do I get a 2015 lowrider lower harness so I can have dummy lights on the guages? Does 2015 lowrider have an ignition switch like my street Bob?
Or am I just over thinking this
I have a 15 street Bob with ignition and dummy lights.
1. Ingnition I will relocate to horn location via big bear mount
2. I'll extend my ignition wires
My question is what do I do with the dummy lights. I see the lowrider tach has a spot on the tach that has the dummy lights. Will big bear harness convert my set up so I no longer have dummy lights separate?
I also see that there is no ignition on lowrider s they use a key fab.
So do I get a 2015 lowrider lower harness so I can have dummy lights on the guages? Does 2015 lowrider have an ignition switch like my street Bob?
Or am I just over thinking this
the big bear chopper harness is the upper section of the low rider harness with the tach and speedo extended already. Then you need the low rider lower harness not the low rider s!
On the low rider it's 2 piece harness a upper and lower section. The big bear choppers is the whole upper harness.
Make sense ?
#412
the dummy lights are in the tach of the low rider
the big bear chopper harness is the upper section of the low rider harness with the tach and speedo extended already. Then you need the low rider lower harness not the low rider s!
On the low rider it's 2 piece harness a upper and lower section. The big bear choppers is the whole upper harness.
Make sense ?
the big bear chopper harness is the upper section of the low rider harness with the tach and speedo extended already. Then you need the low rider lower harness not the low rider s!
On the low rider it's 2 piece harness a upper and lower section. The big bear choppers is the whole upper harness.
Make sense ?
#413
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,363
Received 2,199 Likes
on
1,685 Posts
#414
Thanks.
Ordered:
Lowrider lower harness as pictured above
2 back plates for gauge cups
Black bezel trim rings
Bbc harness
Tach
Front and rear rubber cushions
Bbc ignition relocation bracket
Waiting game begins and then I'll send everything to powder coat
Wheels
Gauge holder and backing plates
Horn
Derby cover
Alloy art strut signal covers
Ordered:
Lowrider lower harness as pictured above
2 back plates for gauge cups
Black bezel trim rings
Bbc harness
Tach
Front and rear rubber cushions
Bbc ignition relocation bracket
Waiting game begins and then I'll send everything to powder coat
Wheels
Gauge holder and backing plates
Horn
Derby cover
Alloy art strut signal covers
The following users liked this post:
cvaria (09-12-2017)
#415
#416
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,363
Received 2,199 Likes
on
1,685 Posts
looks good, even with the bean bag turtle fairing.
Fun mod but, it was weird for me because i still had the console on and my brain wanted to look there for the green neutral "N". Would sit for iutes trying to get the n on the console... it was in the dang guage. 😆
Fun mod but, it was weird for me because i still had the console on and my brain wanted to look there for the green neutral "N". Would sit for iutes trying to get the n on the console... it was in the dang guage. 😆
Last edited by cvaria; 09-17-2017 at 07:06 AM.
#417
Looks good Gar. Next mod Im planning. BBc is nearby and may swing by there and see what they have. Is that their Tank gauge delete plate?
#418
#420