Lazarus Project: 2012
#112
08-06-2016, 08:16 AM
Club Member
#113
08-06-2016, 09:25 AM
Outstanding HDF Member
The following users liked this post:
cvaria (08-06-2016)
#114
08-06-2016, 10:21 AM
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,365
Received 2,201 Likes
on
1,687 Posts
swapped front wheels out...
may seem pointless if you are just looking at the pictures but, the tire on the wheel that i put on is basically new and has a about 500-600 miles on it vs the one that was on the bike that had ~4900 miles on it.
bike got on the fear stand
off with wheel
moved the rotor over to the old wheel...
applied liberal anti-seize... there was none on the axle.. just some nasty looking oil stuff.
done... wheel ready for the buyer who has been waiting for weeks for it.
bike got on the fear stand
off with wheel
moved the rotor over to the old wheel...
applied liberal anti-seize... there was none on the axle.. just some nasty looking oil stuff.
done... wheel ready for the buyer who has been waiting for weeks for it.
Last edited by cvaria; 08-06-2016 at 10:27 AM.
#115
08-06-2016, 10:30 AM
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,365
Received 2,201 Likes
on
1,687 Posts
passenger pegs removed
blowing through the easy stuff....
pulled of the never to be used passenger pegs
off they go.. they have a plane to catch.
mount for upper belt guard installed
(working.... will resume... need parts from ace..5/16-18 1" & 5/16-18 1 1/2")
pulled of the never to be used passenger pegs
off they go.. they have a plane to catch.
mount for upper belt guard installed
(working.... will resume... need parts from ace..5/16-18 1" & 5/16-18 1 1/2")
Last edited by cvaria; 08-06-2016 at 10:47 AM.
#117
08-07-2016, 08:56 AM
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,365
Received 2,201 Likes
on
1,687 Posts
oops and more low hanging fruit.
while adjusting the grips i must have pinched a wire bike is pissed and hand controls, front turns, speedo doesn't work, and bike will not start. fun times..
moving on...
finished passenger peg delete:
added chrome lower belt guard cover:
installed the accessory power adapter (oil cooler fan support):
added tank bra... for increased speed:
moving on...
finished passenger peg delete:
Last edited by cvaria; 08-07-2016 at 09:21 AM.
#118
08-07-2016, 09:24 AM
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,365
Received 2,201 Likes
on
1,687 Posts
more low hanging...
adjusted bars, flipped mirrors and added cheap chrome caps... (really important):
disappointed by the work ahead to figure out how, exactly, i screwed up the front end gizmos... i moisturized the old seat with leather cpr and added the fender bib:
Last edited by cvaria; 08-07-2016 at 09:35 AM.
The following users liked this post:
Tazze (10-26-2020)
#119
08-07-2016, 09:28 AM
Extreme HDF Member
The following users liked this post:
cvaria (08-07-2016)
#120
08-07-2016, 09:45 AM
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,365
Received 2,201 Likes
on
1,687 Posts