Before and current pictures of your Dyna
The following 2 users liked this post by union53:
johnnynitro (08-20-2019),
Krash26 (08-22-2019)
#83
08-20-2019 | 09:29 AM
Road Warrior
Joined: Sep 2016
Posts: 1,558
Likes: 550
From: Cape Coral Fl
Day I brought her home
Didn't like those bags and seat. Dropped with Burley front and rear springs and shocks.
Got rid of the football and added DK 587 with external breather
Added black spoke wraps, hard wired GPS , and phone to bars
New Fairing Bags and seats
Current with more to come
Last edited by Tileman2692; 08-20-2019 at 09:34 AM.
#84
08-20-2019 | 10:05 AM
Tourer
Joined: Oct 2017
Posts: 300
Likes: 43
From: Calgary
This is rad. Only picture I took the day I got it:
A few weeks back lost on a dirt road:
Been catching up on needed maintenance stuff (motor mounts etc). Top of my priority list is some bags (getting tired of stuffing stuff behind my fairing or travelling with nothing), more black, more torque.
A few weeks back lost on a dirt road:
Been catching up on needed maintenance stuff (motor mounts etc). Top of my priority list is some bags (getting tired of stuffing stuff behind my fairing or travelling with nothing), more black, more torque.
#85
08-20-2019 | 08:00 PM
Advanced
Joined: Aug 2017
Posts: 94
Likes: 21
From: Phoenix, AZ
The following users liked this post:
Krash26 (08-22-2019)
#87
08-21-2019 | 12:33 PM
The following 9 users liked this post by checkster2000:
amit (08-23-2019),
Antonio Balls (08-22-2019),
Buratina (03-24-2020),
johnnynitro (08-22-2019),
Krash26 (08-22-2019),
and 4 others liked this post.
#88
08-21-2019 | 04:09 PM
Road Captain
Joined: May 2014
Posts: 609
Likes: 92
From: MA
The sissy bar is the "Hell Bent" bar from Ginz Choppers. Mine is the "monolith" length which at it's peek is 29 inches off the fender. They no longer offer that length. The tallest is the xtreme which is 25 inches tall but if you wanted higher I have a feeling you could talk them into it. They are pretty good with custom stuff but you'll pay for it. I opted for the detachable version and I think their system is much nicer then most. No giant side plates.
The pad is a combination of me and Sick Saddles. Sick Saddles made my seat and pad so when I came up with my back pad idea I had them upholster it for me. I made the backing from 1/4 inch high density plastic and then its held on by integrated well nuts and 1/2 inch emt clamps.
The pad is a combination of me and Sick Saddles. Sick Saddles made my seat and pad so when I came up with my back pad idea I had them upholster it for me. I made the backing from 1/4 inch high density plastic and then its held on by integrated well nuts and 1/2 inch emt clamps.
#89
08-22-2019 | 06:05 AM
Ultimate HDF Member
Joined: Apr 2014
Posts: 6,322
Likes: 2,498
From: Tennessee
I've upgraded it more since those pictures were taken....
The bars I bought locally at a swap meet, I got two sets cheap.
The tank is from an '83 FXR, The fully functional FXDXT repop fairing is from Deviant Fabrications.
The following users liked this post:
Dirtbandit (04-18-2022)
#90
08-23-2019 | 09:40 PM
Intermediate
Joined: Apr 2015
Posts: 36
Likes: 12
From: Australia
The following 2 users liked this post by damo14:
Marty_307 (07-17-2021),
snake_eyes (11-15-2019)