2" tank lift
#23
RE: 2" tank lift
ORIGINAL: Wide Glide 05
I have...2" on mine, looks good. Had to enlongate the rear hole just a little. From the factory, the tank tab for the rear was welded on crooked...Thanks HD.
First pic is of the bike stock, second is after the lift. Makes cleaning the rocker boxes alot easier.
[IMG]local://upfiles/2296/D7B946C088644E8086FFA5EC7B368517.jpg[/IMG]
[IMG]local://upfiles/2296/220071D3BBAF44DEA8F4315EBDB65A77.jpg[/IMG]
I have...2" on mine, looks good. Had to enlongate the rear hole just a little. From the factory, the tank tab for the rear was welded on crooked...Thanks HD.
First pic is of the bike stock, second is after the lift. Makes cleaning the rocker boxes alot easier.
[IMG]local://upfiles/2296/D7B946C088644E8086FFA5EC7B368517.jpg[/IMG]
[IMG]local://upfiles/2296/220071D3BBAF44DEA8F4315EBDB65A77.jpg[/IMG]
#24
#27
RE: 2" tank lift
ORIGINAL: stell55chevy
does anyone know how Jackyl ships tank lifts? is it ups or US. mail. i want to order one and send it to work, but we dont take us mail.
does anyone know how Jackyl ships tank lifts? is it ups or US. mail. i want to order one and send it to work, but we dont take us mail.
You shouldn't need a new crossover line with the 2" lift. Mine now touches the frame but doesn't appear to be any concern at all although I will keep an eye on it for wearing. My vent tube is now stretched pretty tight but there was a longer replacement in the package if needed. Seems to be holding up fine for now though. I also barely had enough play in the wire bundle on my FXDC to get it on but I may have been able to free more up by finding and clipping a wire tie somewhere.
One suggestion from a looks perspective, when you loosen the rear tank bolt, go ahead and take the acorn nut off if you have one, and swap it out with the nylon nut jackyl provides with the lift. It won't be seen with the seat on and you can use the one from the rear to match the other one up front.
Here's mine. Sig pic is before...
[IMG]local://upfiles/41150/18F76E17887A437CB0EFD343238E19D8.jpg[/IMG]