i cant believe it's finally done!
#1
05-15-2007, 02:21 AM
i cant believe it's finally done!
yep..my winter project [that lasted until may] is finally done!
with the exception of the kuryakyn front signal mounts[backordered]
and the new motion pro "blackout series" clutch cable[also backordered]
id just like to say.. i have no idea what made me think i could take on a project this size and see it to fruition,but,if not for help from many here on the h.d.f, and the supervision of my good friend justin[a harley tech. in annapolis md.] this would not have been possible... so my thanks go to eveyone who has ever posted in a dyna thread for your ideas, thoughts, screw-ups, and experiences.. not to mention boosting my confidence on my powdercoating endeavors...
guess i should list the mods/upgrades..
1st the whole bike was basically stripped down to the frame and motor, added a set of '06-'07 wide glide triple trees[with bob's stock tubes],21"front wheel, progressive suspention front end kit,13"flanders bars, yaffe pistol grip levers,chrome buttons, kuryakyn maltese mirrors, motion pro "blackout series"
cables, & goodridge "ebony series" brake lines...out back, i bobbed the rear fender[including the stock taillight], installed harley's run-turn-brake controller, added a dreamweaver's pro street sidemount taillight/license bracket w/ a model A ford "stop" taillight...& used shorter stand-offs for the rear signals[front and rear signals have chrome bulbs installed as well...]also installed progressive 11" shocks
as for the powdercoating... i did everything myself![god that feels good] and after all was said and done, i ended up doing roughly 150 pieces...and there's still chrome on the bike!!!
list includes: spokes [front and rear],bars,dash, triple trees, fork lowers,turn signals,shock hardware,& strut covers..as well as all associated bolts,washers,etc. all done in "super mirror black"
here are some shots i took today...not the best, i'll post more later...
lemme know what you guys think!!!
[IMG]local://upfiles/19220/C02A7776B9834D75A8F5AA177ADAA836.jpg[/IMG]
[IMG]local://upfiles/19220/124822538D874616A757D7B6A67898ED.jpg[/IMG]
with the exception of the kuryakyn front signal mounts[backordered]
and the new motion pro "blackout series" clutch cable[also backordered]
id just like to say.. i have no idea what made me think i could take on a project this size and see it to fruition,but,if not for help from many here on the h.d.f, and the supervision of my good friend justin[a harley tech. in annapolis md.] this would not have been possible... so my thanks go to eveyone who has ever posted in a dyna thread for your ideas, thoughts, screw-ups, and experiences.. not to mention boosting my confidence on my powdercoating endeavors...
guess i should list the mods/upgrades..
1st the whole bike was basically stripped down to the frame and motor, added a set of '06-'07 wide glide triple trees[with bob's stock tubes],21"front wheel, progressive suspention front end kit,13"flanders bars, yaffe pistol grip levers,chrome buttons, kuryakyn maltese mirrors, motion pro "blackout series"
cables, & goodridge "ebony series" brake lines...out back, i bobbed the rear fender[including the stock taillight], installed harley's run-turn-brake controller, added a dreamweaver's pro street sidemount taillight/license bracket w/ a model A ford "stop" taillight...& used shorter stand-offs for the rear signals[front and rear signals have chrome bulbs installed as well...]also installed progressive 11" shocks
as for the powdercoating... i did everything myself![god that feels good] and after all was said and done, i ended up doing roughly 150 pieces...and there's still chrome on the bike!!!
list includes: spokes [front and rear],bars,dash, triple trees, fork lowers,turn signals,shock hardware,& strut covers..as well as all associated bolts,washers,etc. all done in "super mirror black"
here are some shots i took today...not the best, i'll post more later...
lemme know what you guys think!!!
[IMG]local://upfiles/19220/C02A7776B9834D75A8F5AA177ADAA836.jpg[/IMG]
[IMG]local://upfiles/19220/124822538D874616A757D7B6A67898ED.jpg[/IMG]
#2
05-15-2007, 02:23 AM
#3
05-15-2007, 02:24 AM
#4
05-15-2007, 02:25 AM
#5
05-15-2007, 02:25 AM
#6
05-15-2007, 02:26 AM
#7
05-15-2007, 02:39 AM
Outstanding HDF Member
Join Date: Mar 2007
Location: England via the US
Posts: 2,379
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
05-15-2007, 02:40 AM
Cruiser
Join Date: May 2006
Location: Minnesota
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
#9
05-15-2007, 03:14 AM
