RIDEMYBIKEMIKE'S 2008 Bob to Bagger build FLDYNA
#51
#54
Got almost everything nearly new take offs from local craigslist ads except for the fat bob triple trees , got those new from Newcastle harley for 220, $60 cheaper than anywhere else I could find.
#55
So far iv got the inner fiberglassed, about to make speaker domes and then bond and sand. Ended up ditching the HD quick release windshield clamps cuz it made the fairing stick too far forward. Found some cheap black turn signal relocation clamps got 3 set, 2 for fairing and 1 for lower fairing panel that covers fork. Pics to come
#56
Yes I was concerned too but no noticeable difference as far as I can tell. Between that and the air shock the bike actually sits taller. Ended up lowering the triples (raising forks) to close the gap between cowbells and fairing lower panel
#57
So far iv got the inner fiberglassed, about to make speaker domes and then bond and sand. Ended up ditching the HD quick release windshield clamps cuz it made the fairing stick too far forward. Found some cheap black turn signal relocation clamps got 3 set, 2 for fairing and 1 for lower fairing panel that covers fork. Pics to come
#58
Next step is to finish the inner with some speakers and amp in the bag. Sending the last few ugly chrome bits off to powder coating monday.
On a positive note I got the rear brake linkage issue worked out so I can ditch the add on plate and have effective braking ability
Had to griND the lever quite a bit to clear my v+H 2-1 exhuast.
Getting all levers brake and clutch arms bag latches top triple clamp primary cover horn cover and any other ugly chrome bits done black thus coming week
#59
The following users liked this post:
ridemybikeMike (03-19-2016)