Originally Posted by gartec81

even though its not proper i think that *** shot still looks good

Originally Posted by chiefy305

where did u get the rear license plate holder or was it stock for u? thats what i want to do to mine i hate the side look!!

Originally Posted by WMX124

Nailed it.


You actually reduced your contact patch by running the 200 on the stock rim. This will cause premature tire wear.

Originally Posted by 2015 Harley Davidson Street Bob Guy

Originally Posted by Reindeer

I gotta admit that looks really good. Agree you should cut the reflector off that hangs below the plate.

Originally Posted by Dyna rider 78

That looks great from the rear! I'd cut off that plastic tab with the reflector under the plate so you can see the tire better. Question is your brake lights integrated in your turn signals?

Originally Posted by Blue Bob

200mm cobra 6" rim sanitized fender / custom spacers / custom signal light mounts / reworked sprocket and spacer / lots of fitting.

Originally Posted by 2015 Harley Davidson Street Bob Guy

Just replaced my 180mm rear tire with a new 200mm rear tire without having to mod my bike or use spacers or what ever I didn't have to buy wider mud guard

The 200mm rear tire fits right on my 2015 oem 17x4.5 rim

EDIT: now that i have done a few 100 miles on my bike the 200mm tire is a charm

So if you own a 2013+ street bob and you want 200mm tire? Just put it on there is no need for spacers or anything else

If the tire is rubbing against the wall after the installation it could only mean the engine isn't mounted straight so all you have to do is realign the engine to get both side of your tire cleared of the mud guard.

My mechanic is freaking awesome he did it for me if you guys are in Perth Australia and you want a very good mechanic to work on your bike give Ando a call