Accessory wire
#1
#2
Your acc. Plug is also your data port plug. There is a plug under the seat, but that might be for the security antenna I believe.
#4
Trace you wiring diagram if possible. Can bus bikes don't like something powered off a circuit meant for something else. There should be a accessory plug as there is a fuse labeled p&a iirc besides the 15a battery fuse for ignition. The 2 15a fuses are right above the 40 amp maxi fuse. You may be able to trace continuity from the fuse to the plug if the can bus isn't tied into it.
#5
That plug in the picture is for your security system. I will try to post a picture of the inside of that plug so you can match it with the one in your picture. It should mount on that thin piece of plastic in the picture.
Your Data Port plug is grey and is behind the left side cover. This is also your acc. plug. It is only hot when the ignition is on or on acc
Your Data Port plug is grey and is behind the left side cover. This is also your acc. plug. It is only hot when the ignition is on or on acc
Last edited by Qdog002; 08-10-2015 at 10:52 PM.
#6
Ok makes sense I checked and wasn't getting 12volts from that plug. So I can get the harness for the data plug and that will be a keyed hot. I thought I read that that was a constant hot? Guess you can't believe everything you read on the Internet.
Last edited by Clsd350; 08-10-2015 at 10:56 PM.
#7
Trending Topics
#9
#10