Fairings info-Share yours
#72
How was the fitment? Do you think it would be hard to put some quick release latches on? Thinking of doing the same on my '10 sunglo red. Do you have any side pics further away to show the gap your talking about? Thanks
Last edited by ScrapsReady; 06-12-2015 at 04:04 PM.
#73
I'll go take a pic for you. The mounts they include are a little tight and odd but they hold really well. I dont see why you would not put quick release on it.
#74
#75
Road captain
Maybe this can turn into a sticky
List type of fairing you have installed. Name and manufacture
What type of front end and fork size... Narrow,mid,wide. 39mm 41mm 49mm
Post a picture of it on your bike, more pics the better
Details on custom or supplied brackets for install
Trying to create a one stop shop for pics and info of all fairings available to put on your dyna
List type of fairing you have installed. Name and manufacture
What type of front end and fork size... Narrow,mid,wide. 39mm 41mm 49mm
Post a picture of it on your bike, more pics the better
Details on custom or supplied brackets for install
Trying to create a one stop shop for pics and info of all fairings available to put on your dyna
Here is my wide glide with new road captain fairing. Beautifully made and no more wind or ear plugs. Other pics show 2.5" tank lift from dk. Starting to look like my own
The following users liked this post:
Prodigal_Sun (07-30-2019)
#76
Got my rifle fairing this week. Like others have said, the mounting can be a bitch. It's on a 02 fxdx. First time I mounted it it didn't seem to sit right. Would not line up whatsoever with the headlight. Maybe I'll try it without the spacers next. What steps are you guys doing when installing this? Start with the fork clamps first and work your way up? For the amount they are charging you'd think it would be a little more user friendly.
#78
#80
Memphis shades gauntlet fairing on 2012 super glide with 49mm forks stock brackets easy install. The only thing I don't like is there is no way to lock the fairing against theft. I also installed the 10" buffalo bars from drag specilities. I will be relocating the signals to the lower triple clamps so excuse my ugly wires for the signals for now...