Fairings info-Share yours
#461
The following users liked this post:
Pete Robertson (05-08-2019)
#463
#464
Sick ride, I have the road warrior on my FXDB and they arent to bad to get on, you may need to re position the mounts. Make sure you push the bottom in tight and the triggers should pop in nicely. Edit: Meant to tag Autobite and his fxdls but im still learning my way through the forums
Last edited by L4zer Sights; 05-05-2019 at 11:21 PM. Reason: meant to tag Autobite
#466
#467
I replaced my shield with the Rifle non-recurve shield and put the anti-buffeting kit on and it helped a little. I'm finding most of my buffeting is coming from wind going under the bottom portions of the fairing and coming up the tank.
#468
Thanks, I’ll see what happens on the stock shield. If that doesn’t work, I’ll opt for a 17”.
#469
Memphis shade
I have a Memphis shade Gauntlet fairing, I modified it to look like the Tsport fairing.
I Made a mold out of cardboard then took a plexiglass and put it in the oven then placed it on the mold to form it.
Still a work in progress but I’m happy with it.
Bought the fairy on eBay from China $99
plexiglass was $45
My wife’s sportster has an original Memphis shade fairing my Dyna has the modified one.
I Made a mold out of cardboard then took a plexiglass and put it in the oven then placed it on the mold to form it.
Still a work in progress but I’m happy with it.
Bought the fairy on eBay from China $99
plexiglass was $45
My wife’s sportster has an original Memphis shade fairing my Dyna has the modified one.