Fairings info-Share yours
#321
Phil Birch Fairing on my Fat Bob.
Phil made me a custom top mount bracket because my bike had the HD Pull Back Risers on it. He is awesome to deal with.
The fairing performs very well. The wind is off my torso and there is absolutely no buffeting. My head is in clean air.
The paint I used is from here http://www.66autocolor.com/Harley-Da...aint-s/277.htm
It is tri coat Candy Red Sunglow (Stock 08 FB Color) and it turned out really well for spray bombs. If you didn't know you couldn't tell.
Phil made me a custom top mount bracket because my bike had the HD Pull Back Risers on it. He is awesome to deal with.
The fairing performs very well. The wind is off my torso and there is absolutely no buffeting. My head is in clean air.
The paint I used is from here http://www.66autocolor.com/Harley-Da...aint-s/277.htm
It is tri coat Candy Red Sunglow (Stock 08 FB Color) and it turned out really well for spray bombs. If you didn't know you couldn't tell.
#322
I've got an H-D style quarter fairing> I got it from a company called Tommy & Sons. They're out of Lithuania and shipping took FOREVER, mostly due to the package getting lost in the mail route. I love the fairing, very sturdy. The brackets it came with are a little cheesey and only for 39mm frontends which my Low Rider has. Install requires you to drop the forks and slide the clamps over the fork tubes. The only draw back is there is no headlight gasket like the fairings from H-D have. I have a faring adjusted so I have little to no buffeting even with my visor up on my helmet but I can't ride at night cause the headlamp washes out the back of the fairing and it's like riding with out a headlight. Does anyone have a part number for the headlamp gasket off hand? Would weather stripping from the hardware store work just as well?
#323
The following 2 users liked this post by mheck74:
MikeK13 (09-30-2020),
thevinstigator (02-11-2018)
#325
Anyone with the Memphis shades Road Warrior fairing care to chime in as far as wind protection and buffetting? Maybe compared to a regular windshield? I have a Memphis Fats 17" shield on my Street Bob at the moment. It works OK, but I really hate the look of it.
This one:
http://www.memphisshades.com/harley-...arrior-fairing
This one:
http://www.memphisshades.com/harley-...arrior-fairing
#328
#330
For those with the Moons MC or Ebay 1/4 fairing. How's your light fitment? I've turned the mounting block round 180 degrees and added a 1 inch spacer. There is a bunch of room at the bottom between the headlight and the gasket and that's with my light angled way too far up (cars getting annoyed LOL).