What did you do to your Dyna today?
#7131
Very Cool Tall Timber! I just got some bars in, RSD Vintage Apes, 19". Similar to what I have now but taller and a lot better quality. Probably a couple weeks before I get them on....will post them up
#7134
Join Date: Aug 2012
Location: Yarra Ranges, Victoria, Australia
Posts: 1,363
Received 425 Likes
on
259 Posts
I'm going to scotchbrite the little chrome that is on the bike so I might try it on a sample piece of gloss powder coat and see if it dulls it to a level that won't clash as much.
The following users liked this post:
Tomahawk309 (08-05-2017)
#7138
Took the bike for a test ride to make sure everything is good before I head to Sturgis now that I put a 200x17 on the rear and 23" wheel up front, as well as lowering the front 2 inches with the front burly slammer kit, after already having the rear slammer installed for a few years. Only lowered to level out the front more from the wheel height difference. Everything rode well and tracked straight. Still handles really well, just may need to upgrade brakes over the winter. I'm going to put new pads on and get by for the remainder of the season, then look into upgrade brake calipers and such.
Oh. And today when I get off work, I am slapping some road6customs bars on. Goin 14 inch. And if I have time before wednesday, I will be putting a 7 inch headlight on.
Oh. And today when I get off work, I am slapping some road6customs bars on. Goin 14 inch. And if I have time before wednesday, I will be putting a 7 inch headlight on.
Last edited by ChickinOnaChain; 08-09-2017 at 02:56 PM.
The following users liked this post:
Tall Timber (08-05-2017)