Installed a DK Customs 2 inch gas tank lift. Much easier to see the gauges now. Not to mention cleaning the top of the engine.

Was this custom made? Looks good.

 

Routed the AC to the ground. Didn't feel like messing with a catch can or another filter.

 

I ordered it from here: http://www.chappyscustoms1.com/index...te=common/home

Charles has a lot of stock images but you can also upload your own design (which is what I did.)

Ray

 

I ordered the Predator front mount, the progressive monotube kit w/preload and a set of 430's for the rear.

 

Had the bike tuned after decatting and adding an SE Nightstick muffler. Tuned for low to mid rpm torque, picked up 12% in power almost completely across the entire range, 13% in torque from 1600 to 4000 with a nearly flat torque curve. Starts briskly, pulls smoothly, no hiccups and no popping.

 

Exactly the way MoCo should have built it in the first place. If they weren't so scared of the EPA and other Feds, it might have been originally built like you did yours. Enjoy the new feel... tp dd50

 

Hi!!!

I want to change the standard rear tire of my 2007 street bob to 43197-04A Dunlop Screamin' Eagle GT502 180/60B17 Blackwall and found that there is a kit. but the part is not in the HD online store.

Also i found that if I have:

40502-06 Dunlop Tubes 17" Inner Tube 160/70-180/60-17
Center Metal Valve $20.24
43101-06 Dunlop Rim Strips Fits 17-inch Center Valve rims $3.48
59514-06 Rear Fender Inner side plate replacement bracket 2ea $9.87ea
4592 Screw 2ea $3.18ea
10065 cable strap 2ea $0.45ea

I could install the tire. But neither the 59514-06 Rear Fender Inner side plate and the 4592 are on the HD online store.

Any idea on how to get them? Are they necessaries? Do you recommend changing the tire? I want to do it only for the look.

Also, if i change the rear tire, any recommendation on with tire to use as front tire?

Thank you

 

rode to work...work sucked, rode home 52 miles round trip, then changed trans fluid, and primary fluid.

 

Am alternative is to run strut covers and run your wires inside them. Means the inside of the fender stays clean and clear.

 

Installed 2" tank lift and coil relocation. Waiting for more parts to arrive...