What did you do to your Dyna today?
#6411
06-13-2017 | 09:31 PM
New Halcyon all stainless steel 820 bar end mirrors showed up and were installed with new Avon coke bottle grips and Joker Machine mirror blank off plugs. A massive improvement over the stem mirrors I had been using, I can actually see what's behind me and the mirrors fold up for parking. 
.
.
#6412
06-13-2017 | 11:04 PM
Road Master
Joined: Feb 2009
Posts: 755
Likes: 221
From: Murrieta Ca.
#6413
06-13-2017 | 11:29 PM
That's bad ***. I like that the company is from California.
#6414
06-14-2017 | 05:18 AM
It's Win Win
#6415
06-14-2017 | 05:53 AM
Extreme HDF Member
Joined: Feb 2015
Posts: 10,887
Likes: 8,751
From: Galt's Gulch - MI
What ludville1 has done is route crankcase gasses to atmosphere. HD is required to vent the hot, oily crankcase gasses back in to the intake which does your engine no favors. Routing the gasses to atmosphere you will lower intake temperatures, keep your throttle body and intake clean, and you will see a small bump in performance.
Several different methods to vent the crankcase to atmosphere, ludville1 wanted to keep his HO air cleaner so his solution is discrete and effective. I've taken a different route to vent to atmosphere, but venting the crankcase gasses externally is an important and worthwhile modification.
ludville1's original thread: https://www.hdforums.com/forum/dyna-...tmosphere.html
The following users liked this post:
ludville1 (06-14-2017)
#6416
06-14-2017 | 06:20 AM
Last edited by ChickinOnaChain; 07-19-2017 at 07:34 PM.
#6417
06-14-2017 | 08:14 AM
Banned
Joined: Jan 2014
Posts: 8,688
Likes: 1,902
From: Depends on who wants to know.........and why.
Today I just ordered the front and rear chrome heat shields for the OEM exhaust headers. I guess I'll go to the hardware store or autozone for the clamps. I'll do a little sanding on the support rod/bracket that attaches to both the mufflers.
continue taking straightshots off the bike
continue taking straightshots off the bike
Last edited by SixDD; 06-14-2017 at 08:34 AM.
#6418
06-14-2017 | 08:43 AM
Intermediate
Joined: Sep 2016
Posts: 33
Likes: 6
From: Elizabeth city North Carolina
Today I just ordered the front and rear chrome heat shields for the OEM exhaust headers. I guess I'll go to the hardware store or autozone for the clamps. I'll do a little sanding on the support rod/bracket that attaches to both the mufflers.
continue taking straightshots off the bike
continue taking straightshots off the bike
The following users liked this post:
SixDD (06-14-2017)
#6419
06-14-2017 | 09:16 AM
Club Member
Joined: Oct 2011
Posts: 11,019
Likes: 2,324
From: Nor Cal
Originally Posted by SixDD 
Today I just ordered the front and rear chrome heat shields for the OEM exhaust headers. I guess I'll go to the hardware store or autozone for the clamps. I'll do a little sanding on the support rod/bracket that attaches to both the mufflers...
Today I just ordered the front and rear chrome heat shields for the OEM exhaust headers. I guess I'll go to the hardware store or autozone for the clamps. I'll do a little sanding on the support rod/bracket that attaches to both the mufflers...
.
Last edited by ChickinOnaChain; 07-19-2017 at 07:35 PM.
The following users liked this post:
SixDD (06-14-2017)
