Dyna Glide ModelsSuper Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Pulled the rear brake caliper, line, and master cylinder to give it a good cleaning(both the brake components and the bike behind it). Inspected the parts, checked out the rear motor mount, installed new pads then put back together. Fronts getting the same work when I get my forks put back together(+4 tubes and polished lowers). Still need to drain the tanks and prep the sheet metal for paint and I ordered an Led headlight to put in(Amazon special).
Saw this thread done on another site- pretty cool. Post up what you have done to your bike today, an ongoing thread. Whether washing it, adding, or subtracting parts- post up what you have done today. It may give others ideas. Pics welcomed.
Lowered 2" in the rear, black spoke covers, removed baffles, Velocity Stack a/c, Vance and Hines FP3 tuner, LED headlight and turn signals topped off with a one up seat and rear fender bib. to be cont..
Last edited by NO4NJNK; 03-06-2017 at 05:33 AM.
Reason: Forgot something
I had a stupid amount of fun playing with TTS MasterTune doing data collection runs today. The I 15 north of Lake Elsinore is fairly empty early on a Saturday and it is a great section of freeway to do some tuning on. The high point of the day was watching the tach go through 3750 rpm in 6th gear, the bike goes dead straight, no drama.
Tonight I'm playing with the chassis set up a bit, adjusting the shock length from 13" to 13 1/4" adding a turn of preload, taking a click out of the compression damping and 2 clicks out of rebound damping. If it's not raining we will see how that works in the morning.
got thunderheader installed today it took me 6 pack time to put it on hahaa
next week is dyno time....
Looks good. I wish you would have told us first, I would have voted for you to go with the red thunder and share plenty of videos and pics with the forum!!
Got mid way through installing the 3guyz oil filter relocation kit and like a dumbass didn't look close enough at parts needed for the install. Harbor Freight will be calling my name in the morning for a 1 1/8" deep well socket.
The kit appears high quality to me and the guys at 3guyz are pretty cool as well. I'm not a huge fan of pipe thread sealant and wanted to use teflon tape instead, called 'em up and they answered all my questions and more.
Last edited by ChickinOnaChain; 07-20-2017 at 09:18 AM.
Took my '11 super glide in to the dealer to get some 6 inch risers installed (part of bike purchase). Now some of the control wires and cables are in front of the risers and some behind. Also they nearly snapped the handlebar ground wire, exposing copper. The risers didn't help enough and I've decided that I hate drag bars. Ordered low rise buckhorns from Amazon. I'll turn the wrenches on that install.
03-04-2017 | 09:37 PM
