What did you do to your Dyna today?
#4953
Stoked on this fairing. Quality seems pretty good. Its got some weight to it. Just ordered paint, hopefully ill be painted this weekend.
#4954
Looks pretty cool. The windscreen is included, I assume. Is it transparent?
Make sure you wash and scuff the gelcoat before painting. The mold release is very likely not paint compatible. Test with clear water before spraying. If the water beads, the paint may fisheye. (In another life I layed fiberglass truck & RV parts for a living...)
Make sure you wash and scuff the gelcoat before painting. The mold release is very likely not paint compatible. Test with clear water before spraying. If the water beads, the paint may fisheye. (In another life I layed fiberglass truck & RV parts for a living...)
The following users liked this post:
emperor wurm (02-22-2017)
#4955
yes, the fairing was included and transparent. It is tinted very dark though. Still need to get a streetbob headlight bucket though....
#4956
After installing the true track front and rear and testing on the road with good results, thought I would check the torque on the bolts again to be safe, and low and behold, the rear motor mount bolt, the top one had loosened itself by about 2 mm, even though I put blue loctite on the threads, so loosened everything up again front and rear mounts, done the 5 second engine turnover like it says in the manual, re-tightened everything up to torque, should be good to go,
Last edited by Smogbob; 02-22-2017 at 05:54 PM.
#4957
and a little bit cold out there so threw on some memphis lowers, lets see if they help keep cold off the b...s .
The following users liked this post:
CrackHeadBob (02-22-2017)