WTF is a commemorator

Any who - all parts (including the compensator) , plus a new bttry, installed & road tested

Satisfied w/ the results..., total time spent = 8 beers, give or take


Now..., if them wheels would only get done life would be complete


Ghost

 

The commemorator is right next to the thermonuclear aborigine connected to the flux capacitor; we knew exactly what you posted...

 

LOL

Thank You

Ghost

 

amsoil in all three.

 

nice looks good. i also got rid of my football air cleaner with a new take off model. i put redline in the trans and syn in the primary. shifts better.

also got rid of the V&H drag pipes for stock head pipes and SE slip-ons... wow all the torque is back!

 

Thx, Antonio. I looked at that during research but since my AC is a RSD, I no longer am using stock bolts. The RSD has smaller diameter bolts and not certain if that kit would work.


v.r
rj

 

Nothing...still waiting on the insurance process to move forward.

I enjoy reading what y'all are doing tho!

 

12" bungking risers, blackout throttle/idle cable, +6" clutch cable, rewired/organized harness , relocated speedo to risers.

 

Does your Roland Sands A/C have standoffs? If it does you can use a DIY kit to vent crankcase gasses to atmosphere. You block off the holes for the internal venting and drill the standoffs with an 11/32" drill bit and tap with a 1/8" NPT tap and use hose barbs; attach hoses and a T to the hose barbs and you're venting externally... DK has a kit HERE and HERE...

 

Put on Progressive 444 13 inch shocks and vented the crankcase to atmosphere,with the S&S air cleaner it was easy.