Thast looks great, what brand model oil cooler is it?

 

Today I installed the breather assembly, spent a few minutes polishing the rocker cover, installed the cover along with some new chrome bolts. I installed a new chrome dish cover on the cam cover along with some new chrome bolts there as well. also, installed the new rear cylinder exhaust studs, put the spark plugs back in and put the headlight back on the bike.

 

Yes sir! Was just wondering how much they covered down there. And mine are a lot dirty than that right now. Thanks for the pic!

 

Went for a ride and missed my turn after an hour. Didn't care. Rode some more with a brother and got some food. Got gas and then found our way home after a few hours.

Scooped up a Julian Pie also.

 

Installed this bar mounted clock today! Got it from eBay and the clock was 45 minutes off just an hour after I set it... Got a cheap watch from Walmart and mounted it up instead. Works like a charm.

 

Where I worked 30 years ago, the model shop made 15 of the two tube an 10 of the four tube units. had one of each left.

 

Bad-G battery cover bag came in today. Papers, G-door opener, and maybe some extra lenses in case I get caught out at night. I like it...





Freebagin...you can trim those tubes longer. I ended up measuring just under 7 in and pre-trimming them to speed things up. I could have easily went 7 and had plenty of room. Depends on how much you want covered.

 

progressive HD fork springs and 1.5in tank lift

 

Lucky! Looks great!

 

Tonight I installed the rear bracket for the new upcoming exhaust(V&H Straightshots with quiet baffles). Also installed the upper engine mount stabilizer -still have to adjust things there. Installed chrome bolts on side and upper trans covers.