What did you do to your Dyna today?
#1671
Today, I actually rode mine for the first time in a couple of months.
I got the bike fully back together after winter mods including Andrews 57h cams, Pro Port Heads and a load of other bits and pieces.
She pulls like a train from about 2600RPM - quite where she stops pulling, I don't know yet as the weather was nasty and the roads were slippery. However I couldn't resist an hour of auto tuning my base map.
Everything seems to be working fine - can't see any leaks or anything so far.
Happy!
I got the bike fully back together after winter mods including Andrews 57h cams, Pro Port Heads and a load of other bits and pieces.
She pulls like a train from about 2600RPM - quite where she stops pulling, I don't know yet as the weather was nasty and the roads were slippery. However I couldn't resist an hour of auto tuning my base map.
Everything seems to be working fine - can't see any leaks or anything so far.
Happy!
#1672
I finally got my Floorboards. Pretty excited to get it on the road. Hopefully by next week. Temps are on the rise, snow is melting.
Attachment 524091
Attachment 524092
Attachment 524091
Attachment 524092
Last edited by soldierbot; 04-02-2021 at 07:46 AM.
#1673
I put on some monster risers and pro taper tracker bars. I also got a killer deal on a Harley sidekick seat made by Danny gray...... Finally got myself a leather seat 😊
Last edited by soldierbot; 04-02-2021 at 07:46 AM.
#1674
My new a/c cover that a friend made me at his machine shop, I have the S&S Stealth a/c and because of the 2 Allen Head screws on each side of the face plate not just any flat plate will fit right, this one is hollowed out on the inside and sits up flush to the filter. It's a one off so (hopefully) no one has one just quite like it. I'm pretty happy how it turned out....what you guys think?
#1675
just installed a 14" compact windshield on 2016 FXDB. was concerned about head buffeting issues but I find the windshield is just fine. I am 5'10" and have it adjusted up against the upper tree. I found buffeting minimal up to 85MPH. I am stoked about it.
#1677
Ordered the Arlen Ness Big Brake Rotor kit for the Wide Glide. We'll see when it arrives if it has the new 02-972-1 caliper bracket for the 49mm forks or the old style bracket; if it's the old bracket a quick call to Ness should solve that
Not like I can ride the bike anyway, the snow is piled deep 'round here
Edit: I should have added, I ordered it from Phat http://www.phatperformanceparts.com/...rake-rotor.htm For $172 shipped I won't mind if I have to call Ness for the upgraded bracket; for that price it's worth a phone call!
Not like I can ride the bike anyway, the snow is piled deep 'round here
Edit: I should have added, I ordered it from Phat http://www.phatperformanceparts.com/...rake-rotor.htm For $172 shipped I won't mind if I have to call Ness for the upgraded bracket; for that price it's worth a phone call!
Last edited by TinCupChalice; 02-07-2016 at 10:21 AM.
#1679
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,363
Received 2,199 Likes
on
1,685 Posts
Broke down dead fat bob fork tube assemblies to get sliders loose for powder-coating.
https://www.hdforums.com/forum/dyna-...l#post14817982
https://www.hdforums.com/forum/dyna-...l#post14817982
Last edited by cvaria; 02-07-2016 at 02:32 PM.
#1680
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,363
Received 2,199 Likes
on
1,685 Posts
Ordered the Arlen Ness Big Brake Rotor kit for the Wide Glide. We'll see when it arrives if it has the new 02-972-1 caliper bracket for the 49mm forks or the old style bracket; if it's the old bracket a quick call to Ness should solve that
Not like I can ride the bike anyway, the snow is piled deep 'round here
Edit: I should have added, I ordered it from Phat http://www.phatperformanceparts.com/...rake-rotor.htm For $172 shipped I won't mind if I have to call Ness for the upgraded bracket; for that price it's worth a phone call!
Not like I can ride the bike anyway, the snow is piled deep 'round here
Edit: I should have added, I ordered it from Phat http://www.phatperformanceparts.com/...rake-rotor.htm For $172 shipped I won't mind if I have to call Ness for the upgraded bracket; for that price it's worth a phone call!